mypros+
Error code reference

GE Refrigerator Error Code 0112

Deli pan fan feedback missing when the fan is running.

GE codesGE refrigerator codes

Deli pan fan feedback missing when the fan is running.

MyPros+ Max

Get the full diagnostic procedure for 0112.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What 0112 means on a GE refrigerator

Error code 0112 on a GE refrigerator indicates the control board is commanding the deli pan fan to run but is not receiving the expected feedback signal confirming the fan is actually spinning. The control board monitors fan operation through a feedback loop, typically a tachometer or Hall effect signal from the fan motor. When the board sends power to the deli pan fan and gets no return signal within the expected window, it sets this code. The fault is specific to the deli pan compartment fan, not the evaporator or condenser fans.

The deli pan fan is a small motor-driven fan that circulates air through the deli drawer compartment, keeping deli meats, cheeses, and similar items at a slightly cooler temperature than the main fresh food section. When this fan stops reporting back to the control board, the board has no way to confirm air is actually moving through that zone. The deli compartment will lose its temperature advantage and stored items may not be kept at the correct temperature.

This code can be triggered by a failed deli pan fan motor, a broken or disconnected wiring harness between the fan and the control board, or a faulty control board that is not correctly reading the feedback signal. The fan motor itself is the most common failure point, as the feedback circuitry is built into the motor assembly.

Source: manufacturer service documentation.

Common causes of 0112

  1. 01

    Failed deli pan fan motor

    Part replacement

    The fan motor itself has failed mechanically or electrically and is no longer spinning when commanded. A seized motor will draw power but produce no feedback signal, directly triggering error 0112.

  2. 02

    Disconnected or damaged wiring harness to deli pan fan

    Wiring / connection

    The connector or wiring between the deli pan fan and the control board has come loose, corroded, or been damaged, interrupting the feedback signal even if the motor is functional. Inspecting the connector for corrosion, bent pins, or a loose fit is a key early diagnostic step.

  3. 03

    Obstruction preventing fan blade from spinning

    Wiring / connection

    Ice buildup, debris, or a dislodged component in the deli pan area can physically block the fan blade. The motor may receive power but the blade cannot turn, so no feedback signal is generated.

  4. 04

    Faulty main control board

    Part replacement

    If the fan motor and wiring check out correctly but the code persists, the control board may have failed and is not properly reading the feedback signal from the fan. This is the least common cause but should be considered after other components are verified.

See the test procedure for each cause

Frequently asked questions about 0112

What does error code 0112 mean on a GE refrigerator?
Error code 0112 means the control board is running the deli pan fan but is not receiving a feedback signal confirming the fan is spinning. The board expects a response signal from the fan motor during operation. When that signal is absent, the board logs this fault to flag that the deli compartment fan may not be circulating air.
Can I still use my GE refrigerator with error code 0112 active?
The refrigerator will generally continue running with this code active, so your main fresh food and freezer sections should remain operational. However, the deli pan compartment will not maintain its intended cooler temperature zone. Avoid storing temperature-sensitive deli items in the deli drawer until the fan is repaired, and address the fault promptly to prevent food safety issues in that compartment.
How do I fix error code 0112 on a GE refrigerator?
Start by checking the wiring harness connector at the deli pan fan for loose connections, corrosion, or damaged wires. Next, inspect the fan blade for ice buildup or obstructions and clear anything blocking it. If the wiring and blade are clear, test the fan motor directly with a multimeter or by swapping in a known-good motor. If the motor has failed, replace it. If a new motor does not clear the code, the control board may need replacement.
How much does it cost to fix error code 0112 on a GE refrigerator?
A replacement deli pan fan motor typically costs between $20 and $60 for the part, and replacing it is a moderate DIY task requiring basic tools and the ability to access the deli compartment area. If a control board is the cause, boards for GE refrigerators commonly range from $100 to $250 for the part. Professional labor will add $100 to $200 depending on your area, making a control board repair the more expensive scenario at $200 to $450 total.
Will clearing the code fix the problem, or will 0112 come back?
Clearing the error code without fixing the underlying cause will result in the code returning as soon as the refrigerator attempts to run the deli pan fan again. The control board resets and re-checks the feedback signal during normal operation, so a failed motor, broken wiring, or physical obstruction must be corrected before the code will stay cleared.

Related GE refrigerator codes

All GE refrigerator codes
View all 540 GE refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass