Skip to main contentGet Started
Error code reference
GE Washer Error Code E00
No error codes stored; no faults detected.
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
What the E00 error code actually means
E00 is not actually a problem. It simply means your GE washer has checked its memory and found no recorded faults. Your machine is running normally, or any previous issue has already been cleared.
Diagnostic procedure
The full E00 procedure
Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.
MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E00 procedure $9.95
Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.
Most common causes of E00
Ranked by how often they cause this code
- 1Normal operation with no faults present
- 2Fault memory recently cleared
- 3Intermittent fault not yet captured
- 4Diagnostic mode entered in error
Most DIYers save hundreds by diagnosing before ordering parts.
Get Started
$29/month · Cancel anytime · Or $9.95 3-day pass
Questions people ask about E00
What does E00 mean on a GE washer?
E00 means no error codes are stored in the washer's control board memory. It is a confirmation that the diagnostic system found no recorded faults. This is a normal status result, not an alert requiring any repair.
Is it safe to use my GE washer when E00 appears?
Yes, E00 does not indicate any unsafe condition. The code confirms that the control board has not detected or logged any fault. You can continue using the washer normally.
How much does it cost to repair a GE washer showing E00?
Because E00 indicates no fault is present, there is typically no repair cost associated with it. If further diagnostic testing reveals an underlying intermittent component issue, repair costs will vary depending on the specific part involved, but could range from around $50 to several hundred dollars including labor.
Do I need to fix anything if my GE washer shows E00?
No repair is needed for E00 itself. The code indicates a clean fault history. If you are experiencing symptoms despite seeing E00, the problem may be intermittent and not yet captured by the board, so hands-on component testing would be the appropriate next step.
Will resetting my GE washer clear the E00 code?
E00 is not a fault code that needs to be cleared. It is a status message indicating an empty fault log. Unplugging the washer and restoring power will reset the control board, but E00 will continue to appear in diagnostics as long as no actual faults have been recorded.
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass