GE Washer Error Code E58

E58 on a GE washer indicates a communication failure between the main control board and the user interface keypad. The control board has lost the ability to send or receive signals from the keys. This is classified as a non-recoverable error, meaning it cannot be resolved through a reset or by servicing the keypad alone. The main control board must be replaced to clear this fault.

No, the E58 error is specifically classified as a non-recoverable error. Unplugging the washer or performing a reset will not clear this fault because the underlying hardware failure on the main control board persists regardless of power cycling. The error will return immediately upon restart until the control board is replaced.

The cost to repair an E58 error depends on the price of a replacement main control board and the labor rate in your area. Parts alone for a GE washer main control board typically range from $150 to $350, and professional labor can add another $100 to $200 depending on the technician and your location. Getting a quote from a local appliance repair service before committing to the repair is recommended.

The E58 error requires replacing the main control board, which involves working with electrical components inside the washer. Technically experienced DIYers who are comfortable with appliance disassembly and component replacement can perform this repair, but those unfamiliar with appliance electronics should hire a qualified technician. Ensure the washer is completely unplugged before attempting any internal work.

When displaying E58, the washer will not operate normally since the control board cannot communicate with the keypad. Attempting to force the machine through a cycle is not advisable because the control system is in a fault state. You should discontinue use and arrange for the main control board to be replaced before running the appliance again.