GE Washer Error Code PUSHBUTTON

The PUSHBUTTON error code means the washer's control board has detected that one of the buttons on the control panel is registering as continuously pressed. This can be caused by a physically stuck button or by a fault in the PC board's input circuitry. The machine triggers this code to prevent erratic operation from a button input that never releases.

A power reset may temporarily clear the code, but it will return if the underlying cause is not addressed. If a button is physically stuck or the PC board has a hardware fault, the error will reappear as soon as the control system runs its input checks again. A reset alone is not a fix.

If the issue is a stuck button that can be cleaned or freed without parts, the cost may be minimal. If the PC board requires replacement, parts alone typically range from $80 to $250 depending on the model, with professional labor adding an additional $100 to $200. Diagnosing whether the board or a physical button is at fault first can help avoid unnecessary parts costs.

You can start by inspecting each button on the control panel for one that feels sticky, jammed, or does not click and release normally. Cleaning around the button caps to remove residue may resolve a physical jam. If no button appears stuck, the fault likely lies with the PC board, which will need to be replaced.

It is not recommended to continue using the washer while this error is present. A stuck button input can cause the machine to ignore commands, respond unexpectedly, or fail to complete a cycle correctly. Continued use without addressing the fault could lead to further issues with the control system.