Maytag Washer Error Code E560

E560 indicates a communication error between the washer's control board and a USB flash drive. This code belongs to the E560-E563 fault range and only appears during advanced menu data export or import procedures performed by a technician. It does not occur during normal washing operation and does not indicate a problem with the washer's core wash functions.

Yes, E560 is safe to ignore for everyday laundry use. This error only surfaces in the advanced service menu during USB data transfer and has no impact on the washer's ability to complete wash, rinse, or spin cycles. Your appliance poses no additional safety risk because of this code.

If the fix is simply switching to a compatible USB flash drive, the cost is minimal, typically in the range of $5 to $20 for a replacement drive. If the USB port or main control board interface requires repair or board replacement, costs can range from $150 to $400 or more depending on parts and labor rates in your area.

If you are a technician using the advanced service menu, the most straightforward fix is to try a different USB flash drive formatted to FAT32 with a modest storage capacity. Physical port inspection and drive replacement require no special tools. However, if the USB interface on the control board itself is faulty, board replacement should be handled by a qualified technician.

A standard power reset may clear the displayed code temporarily, but E560 will reappear whenever a USB data transfer is attempted under the same conditions that caused the original fault. Resolving the underlying cause, such as using a compatible flash drive, is necessary to prevent the code from returning during service procedures.