Maytag Washer Error Code E562

E562 on a Maytag washer means that an attempt to export data to a USB flash drive has failed. The washer tried to write diagnostic or log information to the connected drive and could not complete the process. This error is related only to the data export function and does not affect the washer's core washing operations.

Yes, it is safe to continue using your washer normally when E562 appears. This error code only relates to the USB data export function and does not indicate any fault with the wash system, motor, pump, or water handling components. Your washer's standard wash cycles will operate without issue.

If the fix only requires replacing the USB flash drive, the cost is minimal, typically a few dollars to around fifteen dollars for a compatible drive. If the USB port on the control board is damaged and requires board repair or replacement, costs can range from roughly seventy-five dollars to several hundred dollars depending on parts and labor. Because this error does not affect washing performance, many users choose to address it only when the export function is actively needed.

Start by trying a different USB flash drive formatted to FAT32 with adequate free space and no write protection enabled. Inspect the USB port on the washer for debris or physical damage and ensure the drive is fully seated. If a different drive resolves the issue, the original drive was likely the problem. If the error persists with multiple drives, the USB port or control board connection may need professional inspection.

A reset may clear the error display temporarily, but the code will likely return if you attempt another USB export without resolving the underlying issue. The root cause, whether it is the drive format, available space, write protection, or a faulty port, needs to be addressed for the export function to work correctly.