mypros+
Error code reference

Miele Dishwasher Error Code F32

Door lock does not close

Miele codesMiele dishwasher codes

Door lock does not close - given time for retraction of adjustable door lock latch is not sufficient (LaPerla II).

First step from the service manual

Check if there is supply voltage; replace the comfort door closing aid if necessary.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F32.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What F32 means on a Miele dishwasher

The F32 error code on a Miele dishwasher (specifically LaPerla II models) indicates a failure in the door lock mechanism. More precisely, the adjustable door lock latch has not retracted within the time window the control expects. The door lock system on LaPerla II units relies on a motorized or electromechanical comfort door closing aid that adjusts the latch position automatically. When the control sends the retraction command and the latch does not complete its movement within the allotted time, F32 is triggered to prevent the cycle from proceeding with an unsecured or mechanically compromised door.

The comfort door closing aid is the central component in this fault. This assembly integrates the motorized latch mechanism that extends and retracts to secure the door at the start of a cycle and release it at cycle completion. If supply voltage to this component is absent, interrupted, or outside the acceptable range, the motor driving the latch will not complete its travel. Wiring harness faults, a failed motor within the closing aid, or a mechanically obstructed latch can all produce the same timed-out retraction condition that triggers F32.

Diagnosis should begin by confirming that proper supply voltage is present at the comfort door closing aid connector. If voltage is confirmed and the latch still fails to retract in time, the comfort door closing aid assembly itself is likely faulty and will need replacement. Physical obstructions in the door latch area, such as debris or a misaligned door, should also be ruled out before condemning the electrical component.

Source: manufacturer service documentation.

Common causes of F32

  1. 01

    No supply voltage to the comfort door closing aid

    Wiring / connection

    If power is not reaching the door closing aid assembly, the latch motor cannot operate and will time out. Check the wiring harness connections and confirm voltage is present at the component connector.

  2. 02

    Failed comfort door closing aid

    Part replacement

    The motorized closing aid itself may have an internal motor or electronics failure, causing it to not complete the latch retraction cycle even when voltage is present. Replacement of the assembly is required in this case.

  3. 03

    Wiring harness damage or loose connector

    Wiring / connection

    A damaged wire or loose connector between the control board and the door closing aid can interrupt the signal or power supply needed for latch operation. Inspect the harness for pinched, corroded, or disconnected wires.

  4. 04

    Mechanical obstruction in the door latch area

    Wiring / connection

    Debris, food particles, or a misaligned door can physically prevent the latch from retracting fully within the required time. Inspect the latch area and door alignment before replacing electrical components.

  5. 05

    Door misalignment

    Wiring / connection

    If the dishwasher door is out of alignment, the latch may bind and fail to move freely, causing the retraction timing to be exceeded. Check door hinges and alignment and adjust as needed.

See the test procedure for each cause

Frequently asked questions about F32

What does F32 mean on a Miele dishwasher?
F32 on a Miele dishwasher indicates that the door lock latch did not retract within the expected time frame. This fault is specific to LaPerla II models and involves the comfort door closing aid, a motorized assembly that controls latch movement. The appliance stops operation as a safety precaution when it cannot confirm proper door latch status.
Can I fix F32 on my Miele dishwasher myself?
Some causes of F32 can be addressed without professional help, such as clearing a mechanical obstruction in the latch area or checking for a loose wiring connector. However, confirming supply voltage and replacing the comfort door closing aid requires electrical knowledge and comfort working inside the appliance. If you are not confident with appliance wiring, a qualified technician is recommended.
Is it safe to use my Miele dishwasher when F32 is displayed?
No, you should not attempt to run a wash cycle while F32 is active. The error means the door locking mechanism has not functioned correctly, and operating the dishwasher without a confirmed secure door lock could result in water leakage or personal injury. Resolve the fault before resuming use.
How much does it cost to repair a Miele dishwasher F32 error?
Repair costs depend on what is causing the fault. If the problem is simply a loose connector or mechanical obstruction, costs may be minimal. If the comfort door closing aid needs replacement, expect to pay for both the part and labor, with total repair costs typically ranging from $150 to $400 or more depending on your region and service provider.
Will resetting my Miele dishwasher clear the F32 error?
A reset may temporarily clear the F32 code, but if the underlying fault with the door lock mechanism is not resolved, the error will return when the dishwasher attempts to lock the door again. Clearing the code without addressing the root cause does not fix the problem. The comfort door closing aid and its wiring must be inspected and repaired or replaced to permanently resolve the fault.

Related Miele dishwasher codes

All Miele dishwasher codes
View all 59 Miele dishwasher codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass