mypros+
Model reference

Miele LAPERLA

Dishwasher

2 documents35 error codes38 service modes

Available documentation

Service Manual

  • G 1xxx and G 2xxx Dishwashers Technical Information240 pg
    Covers this model

Tech Sheet

  • G 1xxx and G 2xxx Dishwashers Technical Information227 pg
    Covers this model
MyPros+ Max

Diagnose your Miele LAPERLA.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (35)

CodeMeaning
F00No fault registered.F01Water/heating NTC temperature sensor or leads short-circuited.F02Water/heating NTC temperature sensor or leads open-circuited.F11Drainage faultF12Water intake fault at start of stepF13Water intake fault at end of stepF14Water intake faultF15Water intake faultF18Flow meter stationary state monitorF19Flow meter B3/4 stiff and not turning freelyF24Heater relay contact faultF25Target temperature faultF26Boiling protectionF32Door lock does not closeF33Door lock does not openF36Door lock switch defectiveF40Electronic faultF42Line frequency registration faultF47Faulty interface between selection-display electronic (BAE) and control-power…F51Heater pressure switch faultF52Heater pressure switch has reset during heatingF53Speed sensor faultF63Slide shutter faultF67Circulation pump speed too lowF68Circulation pump operating after shutoffF69Circulation pump blockedF70Float switch faultF78Circulation pump faultF79Circulation pump interaction faultF84Slide shutter positioning fault.
View all 35 error codes
F85Slide shutter signal change faultF86Salt container lid contact faultF87Sensor softener faultF88Turbidity sensor faultF91Load size registration inactive

Service modes (38)

  • Component Test ModeAccess service mode for the specific model, then navigate to the component test option
  • Service Mode - G 118x/G 2170/G 218x1
  • Service Mode - G 118x/G 2170/G 218x (Inspira/Advanta Incognito)["Open the door.","Switch off the appliance.","Press and hold the Program button.","Switch on the…
  • Service Mode - G 12021
  • Service Mode - G 1202 (Optima Slimline Touchtronic)["Close the door.","Switch off the appliance.","Press and hold the Start/Stop button.","Switch on…
  • Service Mode - G 12621
  • Service Mode - G 1262 (Optima Slimline Incognito)["Open the door.","Switch off the appliance.","Press and hold the Program button.","Switch on the…
  • Service Mode - G 1470/G 24701
  • Service Mode - G 1470/G 2470 (Optima Full-Size Incognito)["Open the door.","Switch off the appliance.","Press and hold the Program button.","Switch on the…
  • Service Mode - G 1472/G 24721
  • Service Mode - G 1472/G 2472 (Optima Full-Size Incognito)["Open the door.","Switch off the appliance.","Press and hold the Program button.","Switch on the…
  • Service Mode - G 20201
  • Service Mode - G 2020 (Advanta Novotronic)["Close the door.","Switch off the appliance.","Turn the selector switch to the 12 o'clock…
  • Service Mode - G 2120/G 214x/G 21501
  • Service Mode - G 2120/G 214x/G 2150 (Inspira/Diamante Touchtronic)["Close the door.","Switch off the appliance.","Press and hold the Start/Stop button.","Switch on…
  • Service Mode - G 2420/G 243x1
  • Service Mode - G 2420/G 243x (Optima Full-Size Touchtronic)["Close the door.","Switch off the appliance.","Press and hold the Start/Stop button.","Switch on…
  • Service Mode - G 2630/G 26701
  • Service Mode - G 2630/G 2670 (Excella Touchtronic/Incognito)["Close the door (open for G 2670).","Switch off the appliance.","Press and hold the C (clear)…
  • Service Mode - G 27321
  • Service Mode - G 2732 (Excella Touchtronic)["Close the door.","Switch off the appliance.","Press and hold the Start button.","Switch on the…
  • Service Mode - G 283x/G 28721
  • Service Mode - G 283x/G 2872 (LaPerla/LaPerla II)["Close the door (open for G 2872).","Switch off the appliance.","Press and hold the C (clear)…
  • Service Programming Mode - G 118x/G 2170/G 218x1
  • Service Programming Mode - G 12021
  • Service Programming Mode - G 12621
  • Service Programming Mode - G 1470/G 24701
  • Service Programming Mode - G 1472/G 24721
  • Service Programming Mode - G 20201
  • Service Programming Mode - G 2120/G 2140/G 21501
  • Service Programming Mode - G 2142/G 21431
  • Service Programming Mode - G 2420/G 243x1
  • Service Programming Mode - G 2630/G 26701
  • Service Programming Mode - G 2630/G 2670 (Excella)["Close the door (open for G 2670).","Switch off the appliance.","Press and hold the C (clear)…
  • Service Programming Mode - G 27321
  • Service Programming Mode - G 2732 (Excella)["Close the door.","Switch off the appliance.","Press and hold the Start button.","Switch on the…
  • Service Programming Mode - G 283x/G 28721
  • Service Programming Mode - G 283x/G 2872 (LaPerla)["Close the door (open for G 2872).","Switch off the appliance.","Press and hold the C (clear)…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Miele dishwasher models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass