Samsung Dishwasher Error Code FC

The FC error code means the dishwasher's fan motor is spinning at less than 100 RPM, which is below the minimum threshold for normal operation. The control board attempts to restart the fan motor three times automatically before displaying the code. This fault is related to the drying fan system and requires inspection of the fan motor, blade, and wiring connections.

It is not recommended to continue running the dishwasher while the FC error is active. The fault indicates the fan motor is not operating correctly, and the dishwasher may not complete cycles properly. Continuing to run the unit without resolving the fault could stress other components and potentially worsen the underlying problem.

Repair costs depend on the cause. If only a wiring connector needs reseating or cleaning, the cost may be minimal. Replacing a fan motor typically involves parts costs ranging from roughly $30 to $80 and labor costs of $100 to $200 if a technician performs the repair. A control board replacement, if needed, would cost more in both parts and labor.

In some cases, yes. If the cause is a blocked fan blade or a loose wiring connector, these are repairs a confident DIYer can perform after disconnecting power to the unit. However, if the fan motor itself has failed internally, replacing it requires accessing internal components and working with the wiring harness, which may be more comfortable for an experienced technician.

A reset may temporarily clear the FC code, but it will return if the underlying fan motor issue has not been resolved. The control board triggers the code only after three failed restart attempts, so the fault is unlikely to disappear on its own. Address the root cause before relying on a reset as a solution.