Samsung Multifunction Printer Error Code C1-1110
The remaining toner cartridge is less than 10%.
The remaining toner cartridge is less than 10%.
First step from the service manual
Print the supply information report and check the life remaining of the toner cartridge.
The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.
Get the full diagnostic procedure for C1-1110.
- Step-by-step tests with expected resistance, voltage, and continuity values
- Wiring diagram references and connector pinouts from the OEM service manual
- Verified part numbers when replacement is required
$29/month · Cancel anytime · Or $9.95 3-day pass
What C1-1110 means on a Samsung multifunction printer
Error code C1-1110 on a Samsung multifunction printer is a toner level warning indicating that the toner cartridge has dropped to less than 10% of its rated capacity. The printer's toner monitoring system tracks cartridge usage through a combination of page count tracking and toner density sensing. When the remaining toner falls below the 10% threshold, the printer triggers this code to alert the user that a replacement cartridge will be needed soon. At this stage, the printer typically continues to function and produce output, but print quality may begin to degrade as toner supply decreases further.
The toner level estimation system relies on internal counters and, in some models, optical or piezoelectric sensing to gauge how much toner remains in the cartridge. The C1-1110 code is generated by the printer's engine controller board after comparing current usage data against the cartridge's rated yield. This is not a hard stop error, but rather an early warning designed to give technicians and users time to source a replacement before the cartridge is fully depleted.
To confirm the actual toner level and gather more detail about all installed supplies, printing the supply information report is the recommended first diagnostic step. This report provides a precise percentage reading for each installed cartridge and can help distinguish between a genuinely low cartridge and a potential sensor or counter error. If the reported level matches the warning, the cartridge should be ordered and staged for replacement to avoid unexpected print interruptions.
Source: manufacturer service documentation.
Common causes of C1-1110
- 01
Toner cartridge at end of life
Part replacementThe most frequent cause is simply that the toner cartridge has been used through the majority of its rated page yield. Printing the supply information report will confirm the remaining percentage and validate that the cartridge is genuinely low.
- 02
High-coverage print jobs accelerating toner consumption
Part replacementDocuments with heavy graphics, large solid fills, or dense text consume significantly more toner per page than standard office documents. If recent print jobs were unusually coverage-heavy, the cartridge may have depleted faster than expected.
- 03
Toner level counter misreading
Wiring / connectionIn rare cases, the internal page counter or toner sensor may report a low level inaccurately due to firmware inconsistencies or a faulty cartridge chip. Printing the supply information report and comparing the displayed percentage against actual print output can help identify a discrepancy.
- 04
Previously refilled or third-party cartridge
Part replacementRefilled or non-genuine cartridges may not communicate toner level data accurately to the printer engine, causing premature low-toner warnings. If the installed cartridge is not an original Samsung unit, this is a likely contributing factor.
Frequently asked questions about C1-1110
What does C1-1110 mean on a Samsung multifunction_printer?
How do I fix the C1-1110 error on my Samsung printer?
Is it safe to keep printing with a C1-1110 warning on a Samsung multifunction printer?
How much does it cost to fix a C1-1110 error on a Samsung printer?
Will resetting my Samsung printer clear the C1-1110 error code?
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass