Samsung Refrigerator Error Code Ice Room-FAN

The Ice Room-FAN error indicates a problem with the fan motor that circulates air through the ice maker compartment. The control board has detected either a feedback signal line contact error, a separated motor wire, or a motor fault during operation. This stops normal fan operation and can affect ice production. Diagnosis starts with measuring voltage at Main PCB connector CN76 between Pin 5 and Pin 1, which should be between 7.0V and 12V.

The refrigerator's main cooling function may continue to operate, but the ice maker compartment will likely not perform correctly while this error is active. Ice production will be affected, and food stored in or near the ice compartment may not stay at the correct temperature. It is best to address the error promptly to avoid further issues.

Repair costs vary depending on which component has failed. A fan motor replacement typically falls in the range of $80 to $200 including parts and labor. If the Main PCB is the cause, costs can range from $200 to $450 or more depending on the model and service provider. Simple fixes like reseating a connector or clearing an ice jam cost little to nothing beyond your time.

Some causes of this error are DIY-friendly, such as reseating a loose wire connector, clearing ice buildup jamming the fan blade, or inspecting the wiring harness for visible damage. However, replacing the fan motor or the Main PCB requires comfort with appliance disassembly and basic electrical testing. If you are not comfortable using a multimeter to check voltage at the PCB connector, professional service is recommended.

A reset may temporarily clear the error code from the display, but if the underlying fault in the fan motor circuit is still present, the error will return once the refrigerator attempts to operate the ice room fan again. A reset alone is not a fix. The wiring, connectors, and motor must be inspected and tested to resolve the issue permanently.