Whirlpool Dryer Error Code FCE6

FCE6 means that Current Transformer B is not functioning at connector J12. This fault is specific to the WEL98 model. The control board monitors a signal from this current transformer and logs the error when that signal is absent or invalid. The first thing to check is whether connector J12 is fully and properly inserted.

It is generally not recommended to continue operating the dryer while an active fault code is present. The FCE6 error indicates that the control board cannot verify proper current sensing, which means the dryer may not be able to detect abnormal electrical conditions correctly. Have the issue diagnosed and resolved before regular use.

Repair costs depend on which component has failed. If the fix is simply reseating connector J12, there is no parts cost involved. Replacing a current transformer or a section of wiring harness typically ranges from around $50 to $150 in parts, plus any labor costs if a technician is hired. A main control board replacement, if needed, can range from $150 to $350 or more depending on availability.

In many cases, yes. The first diagnostic step is simply confirming that connector J12 is fully seated, which requires no special tools or parts. If the connector appears damaged or the fault persists, further diagnosis involves inspecting the wiring harness and testing Current Transformer B, which is manageable for a technician or experienced DIYer comfortable working with appliance wiring.

A power reset may temporarily clear the fault display, but if the underlying problem with Current Transformer B or connector J12 has not been addressed, the FCE6 code will return during the next cycle. A reset alone is not a repair and should not be relied on as a solution.