Whirlpool Oven Error Code C-83

C-83 indicates a Type 2 failure of the induction cooktop temperature sensor. This means the control system has detected that the sensor signal is stuck and not changing as expected with temperature. The cooktop will not operate in this condition because the control board cannot confirm safe temperature behavior. Inspection of the sensor connector and wiring is the starting point for diagnosis.

No, you should not attempt to use the induction cooktop while C-83 is displayed. The error indicates the temperature monitoring system is not functioning correctly, which means the cooktop cannot verify that the surface is operating within safe thermal limits. Continued use under this condition creates a risk of undetected overheating.

If only the sensor connector needs reseating, there is no parts cost. A replacement induction cooktop temperature sensor typically costs in the range of $20 to $80 depending on the specific model. If the induction control board requires replacement, parts alone can range from $150 to $400 or more, plus any applicable labor charges from a technician.

The first step, reseating the temperature sensor connector, is a straightforward task that a careful DIYer can perform after unplugging the range. If that does not resolve the fault, testing and replacing the sensor or inspecting the wiring harness requires more comfort with appliance disassembly and basic electrical checks. A failed control board is best handled by a qualified technician.

Disconnecting power is required as the first diagnostic step, but simply resetting the range will not permanently clear C-83 if the underlying fault with the temperature sensor or its wiring still exists. The code will return once the control board re-evaluates the sensor signal. The root cause must be identified and corrected for the fault to clear.