mypros+
Error code reference

Wolf Range Error Code 06-00

Brownout error.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 06-00 error code actually means

Your Wolf range is detecting that the electrical power coming into it is weaker than it needs to work properly. This is called a brownout, and it usually means there is a problem with your home's electrical supply or wiring. The range has shut itself down to prevent damage until the power issue is resolved.

Diagnostic procedure

The full 06-00 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check home wiring, voltages, replace Relay Module.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 06-00 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 06-00

Ranked by how often they cause this code
  1. 1Low or sagging utility supply voltage
  2. 2Undersized or degraded home wiring
  3. 3Loose or corroded connections at receptacle or panel
  4. 4Faulty relay module
  5. 5Tripped or weak circuit breaker

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 06-00

What does 06-00 mean on a Wolf range?
Error code 06-00 on a Wolf range indicates a brownout condition, meaning the control system has detected that the incoming electrical supply voltage is too low for safe operation. The range shuts down to protect its components from damage caused by insufficient voltage. This can be caused by utility supply issues, home wiring problems, or a faulty relay module.
Is it safe to keep using my Wolf range when error 06-00 appears?
No, you should not continue using the range while this error is active. A brownout condition means components are operating under abnormal voltage levels, which can damage the control board, relay module, motors, and other electronics. The range's protection system has flagged this condition specifically to prevent further damage, and operating through the fault could lead to more costly repairs.
How much does it cost to repair a Wolf range showing error code 06-00?
Repair costs vary depending on the cause. If the issue is a wiring or utility problem corrected by an electrician, costs can range from $100 to $400 or more depending on the scope of work. If the relay module needs replacement, parts and labor combined typically range from $200 to $600 or more, depending on your location and service provider. Diagnosing the exact cause first will help you get an accurate estimate.
Can I fix error code 06-00 on my Wolf range myself?
Some causes of error 06-00 are within reach of a knowledgeable DIYer, such as checking for a tripped breaker, inspecting the receptacle for loose connections, or confirming that other high-draw appliances on the same circuit are not causing voltage sag. However, measuring line voltage at the terminal block under load and replacing the relay module require electrical knowledge and comfort working with high-voltage components. If you are unsure, contact a qualified appliance technician or electrician.
Will resetting the range clear error code 06-00?
Resetting the range by cycling power at the breaker may temporarily clear the error code, but if the underlying cause such as low supply voltage, a wiring problem, or a faulty relay module has not been resolved, the code will return. A reset alone is not a fix and should only be used as part of the diagnostic process after addressing the root cause.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass