Model reference
Amana 108-2C
Air Conditioner
62 error codes8 service modes
MyPros+ Max
Diagnose your Amana 108-2C.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (62)
CodeMeaning
:Flashing colon indicates a power failure has occurred.11Oven sensor opened (upper oven).12Oven sensor shorted (upper oven).1CShorted key detected on keypad.1dDoor and switches do not agree21Oven sensor opened (lower oven).22Oven sensor shorted (lower oven).2CKeytail unplugged31EEPROM communications error (internal control error).32EEPROM communications error (internal control error).3dDoor and switches do not agree4dDoor latch not operating properly.51BAKE/BROIL range over temperature condition.52CLEAN range over temperature condition.6CEEPROM communications error (internal control error).7CEEPROM communications error (internal control error).8CEEPROM communications error (internal control error).9dLatch error during CLEAN cycle.All Other CodesElectronic control malfunction.F0No error present.F0-E0Default F codeF1-E0Door switch malfunction (E0 variant).F1-E1Door switch malfunction (E1 variant).F1-E2Door switch malfunction (E2 variant).F1-E3Electronic control malfunction.F1-E4Electronic control malfunction.F10Display error.F2Membrane switch failure.F2-E0Keypad not connected.F2-E1Keypad not connected.View all 62 error codes
F2-E3Key held down too long, or key is shorted.F2KKey or foil pressed more than one minute.F2TTouch panel pressed more than one minute.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3E0Main sensor open (upper oven sensor circuit is open).F3E1Main sensor short (upper oven sensor is shorted).F3E2Meat probe shorted.F3E4Bottom sensor open (lower oven sensor circuit is open).F3E5Lower/bottom sensor short (lower oven sensor is shorted).F3E6Warming drawer sensor open.F3E7Warming drawer sensor shorted.F3HHumidity sensor out of range.F3TTemperature sensor out of range.F4-E0Meat probe shorted.F4E2Over temperature during cook mode.F4E3Over temperature during clean (self-clean) mode.F4E7Over temperature in cavity 2.F5E0Door latch mismatch (mismatch between door switch and latch switch).F5E1Latch not operating (door latch motor is not functioning).F5E2Door switch fault.F5E4Latch switch fault.F5E7Cannot unlock door / unlock door error.F6Microwave relay failure.F6E4Lost communication between power supply board and display board.F71100W inverter failure.F8-E0Self-clean latch will not lock.F8-E1Self-clean latch will not unlock.F9CE2PROM CheckSum error.F9EE2PROM empty.f9ME2PROM missing.F9WE2PROM Write error.
Service modes (8)
- Bake Temperature Offset Adjustment["Press BAKE pad for 5 seconds.","The default temp 0° or a previously entered offset temp will show…
- Default Fault Code Display["Press and hold CANCEL key for 5 seconds.","If no pre-existing fault, F0-E0 will be displayed."]
- Diagnostic mode["Press the Cancel and Start keys in the following order
- Engineering Mode1
- Fahrenheit to Celsius Conversion["Press the BROIL pad for 5 seconds.","The temperature will be displayed in degrees Celsius…
- Sabbath Mode Exit["If oven is in Sabbath Mode, 'SAB' will appear in digital display.","Press and hold '6' key for 5…
- Self-diagnostic test mode["Press the clock key.","Press keys '1, 2, 3' on the keyboard.","Touch 'AM/PM' on the touch screen…
- Temperature Adjustment Mode1
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana air conditioner models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass