mypros+
Model reference

Frigidaire FPEF3081KFD

Range

12 documents32 error codes5 service modes

Available documentation

Tech Sheet

  • SERVICE DATA SHEET - Electric Range with ES 1000 Electronic Oven Control2 pg
    Covers this model

Service Manual

  • Frigidaire Professional 36" Induction Range73 pg
    Covers this model
  • Dual Fuel Range Slide-in Models and Professional Series Owner's Guide44 pg
    Covers this model
  • Dual Fuel Range Slide-in Models and Professional Series Owners Guide36 pg
    Covers this model
  • Electric Range Slide-in Models and Professional Series Owner's Guide72 pg
    Covers this model
  • Convection Range Professional Series Owner's Guide48 pg
    Covers this model
  • Dual Fuel Range Slide-in Models and Professional Series Owners Guide24 pg
    Covers this model
  • Dual Fuel Range Slide-in Models and Professional Series Owner's Guide24 pg
    Covers this model
  • Electric Range Drop-in/Slide-in Models and Professional Series Owner's Guide28 pg
    Covers this model

Training

  • Frigidaire Professional 36" Dual Fuel Range Service Training65 pg
    Covers this model
  • Frigidaire Professional 36" Gas Range Service Training70 pg
    Covers this model

Other

  • 599563376411 pg
    Covers this model
MyPros+ Max

Diagnose your Frigidaire FPEF3081KFD.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (32)

CodeMeaning
1RTD Sensor Error8Cooling Fan ErrorBAD PROBEThe temperature probe has not been completely inserted into the wall receptacle…F1Electronic oven control has detected a fault condition.F10Runaway temperatureF11Shorted keypad or selector switch.F12EOC internal software error or failure.F13EOC internal software error or failure.F14Keyboard tail failure.F15EOC internal hardware error or failure.F19EOC internal hardware error or failure.F3Electronic oven control has detected a fault condition.F30Open oven sensor probe circuit.F31Shorted oven sensor probe circuit.F42EOC internal software configuration error.F60EOC oven temperatureF62Internal signal voltage error.F63Display communication error.F64Time base failureF65Keyboard short circuit or internal EOC failure.F66EOC internal power supply failure.F68High voltage conditionF69High voltage conditionF90Door lock motor or latch circuit failure.F91Door lock motor or latch circuit failure.F92Door lock motor or latch circuit failure.F93Door lock motor or latch circuit failure.F94Door lock motor or latch circuit failure.F95Door lock motor or latch circuit failure.LOCKEDThe control panel has been locked to prevent accidental operation.
View all 32 error codes
PLEASE INSERT PROBEThe temperature probe has been forgotten or not inserted properly when a…SENSOR ERRORDuring a Sensor feature, the door was opened before steam could be detected, or…

Service modes (5)

  • Convection Heater Test P5Refer to convection heater test P5 procedure on page 71 (specific button sequence not detailed in…
  • Oven temperature calibration adjustment["Push the BAKE button.","Set the temperature to 550°F by pushing and holding the UP ARROW…
  • Relay Test ProcedureRefer to relay test procedure outlined on pages 67-68 (specific button sequence not detailed in…
  • Silent control panel mode["Push and hold the STOP TIME button for 7 seconds until the control beeps once."]
  • Temperature Adjustment (Calibration Offset)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Frigidaire range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass