Model reference
Frigidaire 194177
Washer
1 document29 error codes5 service modes
Available documentation
Service Manual
- Technical Service Manual 2013 HETL Washer72 pg
MyPros+ Max
Diagnose your Frigidaire 194177.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (29)
CodeMeaning
E11Fill time too longE21Water not pumping out fast enough.E31Electronic pressure switch failure.E32Pressure sensor calibration problems.E35Pressure sensor indicates water overfill.E41Control board thinks lid switch is open.E42Lid lock device failure.E43Control board fails to lock lid.E44Lid closed sensing failure.E45Lid locked sensing failure.E46Lid lock command sensing failure.E49Lid incongruence between lid closed sensing and lid locked sensing.E4ALid locked triac sensing failure on control board.E52Tachometer signal missing from the drive motor.E53Low voltage to control board.E57High current on inverter.E58High current on motor phase.E59Incongruence between real motor speed and expected motor speed.E5AHigh temperature on heat sink on control board.E5CVoltage too high on control board.E75Valve NTC (thermistor) failure.E91Communication error between UI board and control board.E92Communication error between UI board and control board.E93UI board or control board problem.E94Control board problem.E97UI board or control board problem.EA1Power supply frequency out of limits.EAELine safe relay sensing failure.EF1Clogged drain pump.Service modes (5)
- Diagnostic Mode (Push Button Selection)["Wake up unit.","Turn cycle selector knob to the normal cycle position.","Press and hold the cycle…
- Diagnostic Mode (Rotary Selection - no access to outlet)["Wake up unit.","Place cycle selector knob in presoak position.","Position temp knob all the way…
- Diagnostic Mode (Rotary Selection - with access to outlet)["Unplug the unit.","While unplugged, place cycle selector knob in presoak position.","Position…
- Full Control Reset (Rotary Selection - no access to outlet)["Wake up unit.","Place cycle selector knob in presoak position.","Position temp knob all the way…
- Full Control Reset (Rotary Selection - with access to outlet)["Unplug unit.","While unplugged, place cycle selector knob in presoak position.","Position temp…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Frigidaire washer models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax