Model reference
GE ZET1PL1SS
Oven
2 documents13 error codes5 service modes
Available documentation
Service Manual
- Monogram 30-in. Single and Double Convection Wall Ovens Technical Service Guide53 pg
- GE Consumer & Industrial Technical Service Guide - Monogram 30-in. Single and Double Convection Wall Ovens53 pg
MyPros+ Max
Diagnose your GE ZET1PL1SS.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (13)
CodeMeaning
C1Communication fail with upper relay board.C2Communication fail with upper temperature encoder.C3Communication fail with upper mode encoder.C4Communication fail with lower relay board.C5Communication fail with lower temperature encoder.C6Communication fail with lower mode encoder.F2Oven temperature inside cavity exceeded 650°F (unlatched) or 915°F (latched)…F3Open oven sensor (over 2900 ohms).F4Shorted oven sensor (under 950 ohms).F7Shorted key on logic display assembly.F8EEPROM data shift failure.F9Cooling fan stalls or other cause of open thermal switch (FAD).FCDoor latch error.Service modes (5)
- Control Lockout["Push and hold the COOK TIME and DELAY START buttons at the same time for 3 seconds until the…
- F Code Recall Mode["Press together the TIMER, CLOCK, and ENTER buttons for 3 seconds.","The last 7 F codes will be…
- Sales Mode["Connect the unit to 120 VAC from L1-L2 only.","The control will function normally but the 240 VAC…
- Service Test Mode (Factory Test Mode)["Restart the unit (cycle power).","Within 5 minutes of restart, press the Push to ENTER knob, COOK…
- Special Features Mode["Ensure either the Oven Mode knob and/or the Temperature knob is turned to OFF.","Push and hold…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass