mypros+
Model reference

Jenn-Air JJW8627DD

Oven

10 documents35 error codes6 service modes

Available documentation

Tech Sheet

  • Electric Wall Oven Technical Information9 pg
    Covers this model

Service Manual

  • Electric Wall Ovens Service Manual37 pg
    Covers this model

Bulletin

  • Installation Bulletin1 pg
    Covers this model
  • Technical Bulletin - Side Trim Change1 pg
    Covers this model
  • Installation Bulletin - IDC-0004-B Updated Dimensions in Installation Instructions 8101P602-601 pg
    Covers this model
  • Installation Bulletin - IDC-0004-B Updated Dimensions in Installation Instructions 8101P602-601 pg
    Covers this model
  • Technical Bulletin TDC-0100A-B1 pg
    Covers this model
  • Technical Bulletin - Hinge and Receptacle Modification2 pg
    Covers this model

Service Flash

  • TechnicalBulletin - TDC-0104-B - Center Oven Temperature in Bake_TDC-0104-B1 pg
    Covers this model
  • Repair Tip - Hinge and Receptacle Modification2 pg
    Covers this model
MyPros+ Max

Diagnose your Jenn-Air JJW8627DD.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (35)

CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected or keyboard loop improper value.1c31Cancel key circuit problem (upper oven / single cavity).1c32Cancel key circuit problem (lower oven).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM (upper oven / single cavity).1c82Cook profile corrupted in EEPROM (lower oven).1d11Runaway temperature (650°F) detected with door unlocked (upper oven / single…1d12Runaway temperature (650°F) detected with door unlocked (lower oven).1d21Runaway temperature (950°F) detected with door locked (upper oven / single…1d22Runaway temperature (950°F) detected with door locked (lower oven).3d11Temperature sensor failure3d12Temperature sensor failure3d21Temperature sensor failure3d22Temperature sensor failure3d41Meat probe shorted (probe resistance < 0 Ω).3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) during cook or clean (upper oven /…4d22No Reverse Airflow Fan rotation (no/low RPM) during cook or clean (lower oven).4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation4d42High Reverse Airflow Fan rotation4d51Door switch circuit failure4d52Door switch circuit failure9d11Door latch will not lock (upper oven / single cavity)
View all 35 error codes
9d12Door latch will not lock (lower oven)9d21Door latch will not unlock (upper oven / single cavity)9d22Door latch will not unlock (lower oven)9d31Door latch both locked and unlocked simultaneously (upper oven / single cavity)9d32Door latch both locked and unlocked simultaneously (lower oven)

Service modes (6)

  • 208/240V Mode Selection["Press SETUP pad.","Press DOWN ARROW pad to scroll to 208/240 V pad.","Select 208 or 240.","Select…
  • Control Lockout["Press and hold BACK and ENTER pads for 5 seconds."]
  • Demo Mode["Press SETUP pad.","Press DOWN ARROW pad to scroll to DEMO pad.","Select DEMO to activate.","Press…
  • Diagnostic Code Display Mode["Press SETUP pad.","Press DOWN ARROW pad three times until SERVICE is displayed.","Press SERVICE…
  • Sabbath Mode["Press SETUP pad.","Press DOWN ARROW pad.","Press SABBATH pad to activate Sabbath mode.","Select…
  • Test Mode["Press SETUP pad.","Press DOWN ARROW pad three times until SERVICE is displayed.","Press SERVICE…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Jenn-Air oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass