mypros+
Model reference

Jenn Air JJW8630AAW

Oven

2 documents18 error codes9 service modes

Available documentation

Service Manual

  • Jenn Air Oven Service Manual JJW8630AAW60 pg
    Covers this model
  • Electric Wall Oven Service Manual60 pg
    Covers this model
MyPros+ Max

Diagnose your Jenn Air JJW8630AAW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (18)

CodeMeaning
F-Communication error between boards.F0No fault codes sensed in that portion of the system (indicates no stored…F1Oven temperature sensor failure or sensor circuit failure.F1-3Shorted key on keyboard.F1-4Keyboard disconnected.F2Over temperature sensed; over 620°F sensed by control in time of day mode or…F3Cooling fan on with no oven function selected.F4Shorted oven sensor.F5Check latch assembly failure.F6Shorted meat probe alarm.F7Shorted key sensed for 32 seconds.F8Shorted meat probe alarm.F9Door lock safety circuit on power relay board sensed.FACommunication error between boards (display board side).FBCommunication error between boards (PRB side).FCSecond oven error sensed (double oven only).FFInvalid temperature reading on power relay board.FRSecond oven error sensed (double oven only).

Service modes (9)

  • Clear Stored Fault CodesEnter the fast test mode, then press both the Cook Time and Stop Time keys simultaneously for 5…
  • Clock and Temperature Display Change (12/24hr, °F/°C)Hold either Timer key down on power up
  • clock_and_temperature_format_changeHold either Timer key down during power up
  • Fast Test / Diagnostic Test ModeHold the Stop Time key down at power up, OR hold the Stop Time key down for 10 seconds within 5…
  • fast_testHold the Stop Time key down at power up, OR hold the Stop Time key down for 10 seconds within 5…
  • fault_code_clearingEnter fast test mode, then press both the Cook Time and Stop Time keys simultaneously for 5 seconds.
  • JJW Models Component TestTouch the desired function pad (Bake, Broil, Convect Bake, Convect Roast, Drying, or Clean) then…
  • Temperature Offset ChangeProgram bake above 500°F, repress bake pad and hold for 3-4 seconds (pad must be re-pushed within 3…
  • temperature_offset_change1) Program bake above 500°F

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass