mypros+
Model reference

Jenn-Air MC-2

Range

1 document21 error codes8 service modes

Available documentation

Service Manual

  • Service Manual - JennAir EOC III Range Control28 pg
    Covers this model
MyPros+ Max

Diagnose your Jenn-Air MC-2.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (21)

CodeMeaning
1c1cShorted key detected on the keyboard.1c2cKeyboard disconnected from the control.1c4cBoard-to-board communication failure between display and relay boards.1c6cEEPROM hardware fault detected during EEPROM access.1c7cControl not calibrated; detected during programming, cook, or clean mode.1c81EEPROM CRC error in upper cavity cook profile data.1c8cEEPROM CRC error in user options data.1d11Unlocked runaway temperature condition detected (temperature exceeds 600°F with…1d21Locked runaway temperature condition detected (temperature exceeds 950°F with…3d11Oven temperature sensor open circuit detected during active cook or clean mode.3d21Oven temperature sensor shorted during active cook or clean mode.3d41Meat probe shorted during active probe cook mode.3d51Meat probe not calibrated; detected during active probe cook mode.4d11Door switch not closed when door latch is in the locked position.4d21No cooling fan rotation detected during active cook or clean mode.4d31Cooling fan is running when it should be de-energized (cooling fan on when…4d41Cooling fan overspeed condition detected during active cook or clean mode.4d51Door switch circuit fault detected during active clean, convection, or control…9d11Door latch will not lock when it should be in locked position.9d21Door latch will not unlock when it should be in unlocked position.9d31Door latch indicates both locked and unlocked states simultaneously.

Service modes (8)

  • Control Reset["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {CONTROL RESET}…
  • Display Test Mode["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {DISPLAY TEST} is…
  • Engineering Mode["Enter the Service Mode.","Press the {ENGINEERING} ATM key from the main Service screen.","The…
  • Faults Mode["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {FAULTS} is…
  • Service Mode["Enter the Setup menu.","Scroll down the options until 'SERVICE' option is displayed.","Press the…
  • Test Mode (Relay Test)["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {TEST} is…
  • Usage Menu["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {USAGE} is…
  • Version Mode["Enter the Service Mode.","Press the down arrow repeatedly (right ATM key) until {VERSION} is…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Jenn-Air range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass