LG WF419AAU

Available documentation

Error codes (14)

Service modes (11)

• Board Input Test Mode["Activate Service Mode first.","Press the My Cycle (or Pure Cycle or Steam) key during Service…
• Continuous Run Mode["From Power On State (Normal User Mode), press Delay Start Key and Extra Rinse Key together for 3…
• Cycle Count Check Mode["Activate Service Mode first.","Press the Signal Key during Service Mode."]
• Demo Mode["From Normal User Mode (while a cycle is not running), press Delay Start + My Cycle (or Pure Cycle…
• Diagnostic Code Check Mode["Activate Service Mode first.","Press the Extra Rinse key during Service Mode
• EEPROM Clear Mode["The unit needs to be on.","Press Delay Start Key, Signal Key, and Power Key at the same time."]
• Fast Time Down Test Mode["Activate Service Mode first.","Press the Temp key during Service Mode."]
• Quick Spin Test Mode["Enter Service Mode first.","During Service Mode, press the Delay Start and My Cycle (or Pure…
• Quick Test Mode["Plug in the unit (power off state).","Press Soil Key, Signal Key, and Power Key at the same…
• S/W Version Check Mode["Activate Service Mode first.","Press the Soil Level Key during Service Mode."]
• Service Mode["The washer must be on.","Press the Signal and Extra Rinse Keys for 3 seconds or until the unit…

Full entry steps, exit procedures, and test sequences are available in Max.