mypros+
Model reference

Maytag MMW5530DAB20

Oven

4 documents40 error codes12 service modes

Available documentation

Tech Sheet

  • Electric Wall Oven/Microwave—Technical Information11 pg
    Covers this model

Service Manual

  • Combination Electric Wall Ovens and Microwaves Service Manual45 pg
    Covers this model

Service Flash

  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
    Covers this model

Other

  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MMW5530DAB20.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (40)

CodeMeaning
1c1cShorted key detected on the control board.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem on upper oven (or single cavity).1c32Cancel key circuit problem on lower oven.1c4cPower micro communication failure (UH1/2 control only).1c5cVcc or ground fault1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper oven (UH1/2 control).1c82Cook profile corrupted in EEPROM for lower oven (UH1/2 control).1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked, upper oven.1d12Runaway temperature (650°F) detected with door unlocked, lower oven.1d21Runaway temperature (950°F) detected with door locked, upper oven.1d22Runaway temperature (950°F) detected with door locked, lower oven.3d11Temperature sensor open (infinite resistance), upper oven.3d12Temperature sensor open (infinite resistance), lower oven.3d21Temperature sensor shorted (0 Ω resistance), upper oven.3d22Temperature sensor shorted (0 Ω resistance), lower oven.3d41Meat probe shorted (probe resistance <0 Ω), upper oven (UH1/2 control only).3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No reverse airflow fan rotation (no/low RPM), upper oven.4d22No reverse airflow fan rotation (no/low RPM), lower oven (UH1/2 control only).4d31Reverse airflow fan state error4d32Reverse airflow fan state error4d41High reverse airflow fan rotation (high RPM), upper oven (UH1/2 control only).4d42High reverse airflow fan rotation (high RPM), lower oven (UH1/2 control only).4d51Door switch circuit failure
View all 40 error codes
4d52Door switch circuit failure9d11Door latch will not lock9d12Door latch will not lock9d21Door latch will not unlock9d22Door latch will not unlock9d31Latch state unknown9d32Latch state unknown9d41Unlock condition9d51Lock and unlock state unknown9d61Door position switch open circuit detected when clean mode is active.

Service modes (12)

  • 24 Hour Clock TogglePress and hold CANCEL and FAVORITE pads for 3 seconds.
  • Child Lock OutPress and hold CANCEL and COOK & HOLD pads for 3 seconds
  • Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 seconds.
  • Diagnostic Code DisplayPress and hold the 0/AUTOSET pad while powering up the unit
  • Diagnostic Code Display Mode (H1 Control)1
  • Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 seconds.
  • Oven Temperature Adjustment1
  • Quick TestPress and hold CANCEL and BROIL pads simultaneously for 3 seconds
  • Quick Test Mode (H1 Control)1
  • Sabbath ModeHold CLOCK button for 3 seconds to activate
  • Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 seconds.
  • Test Mode (UH1/2 Control)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass