Model reference

Whirlpool WOC97ES0ES03

Oven

4 documents40 error codes10 service modes

Available documentation

Tech Sheet

Tech Sheet - W11041088 - Rev B (FR)_W1104108824 pg
Covers this model

Installation Guide

Installation Instructions16 pg
Covers this model
Installation Instructions36 pg
Covers this model
Installation Instructions32 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool WOC97ES0ES03.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Oven

F1 on my Whirlpool WOC97ES0ES03

M+

Internal failure (user interface,

From Tech Sheet W10802152, p.44:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (40)

CodeMeaning

F1Internal failure (user interface, Copernicus appliance manager, thermal fuse).F1-E5Microwave oven inverter error.F1-E6Microwave generation error.F1E0Oven user interface failure.F1E1Internal oven appliance manager (AM) error.F1E4Microwave oven relay error.F1E5Microwave oven inverter error.F1E6Microwave generation error.F2-E0Keypad disconnected.F2-E1Key stuck or short-circuited on keypad.F2E0Keypad disconnected.F2E1Stuck or shorted keypad.F3-E0Main oven sensor open or short-circuited.F3-E3Meat probe or meat probe connector jack short-circuited.F3E0Main oven sensor open or shorted.F3E3Meat probe connector jack or meat probe shorted.F4-E4Microwave oven humidity sensor error.F4-E8Inverter overheating.F4E1Microwave cavity temperature sensor error.F4E2Magnetron temperature sensor error.F4E4Microwave oven humidity sensor error.F4E8Inverter over temperature.F4E9Inverter and magnetron over temperature.F5-E0Mismatch between door and latch switches.F5-E1Oven latch inoperative.F5E0Door and latch switch do not agree.F5E1Latch not operating.F5E6Oven user interface lost communication.F6-E0User interface F6-E1Temperature exceeded / overtemperature.

View all 40 error codes

F6-E4Status state mismatch between user interface and appliance manager.F6-E5Product not connected correctly (microwave oven manager communication).F6-E6Oven manager F6-EAOvertemperature F6E0Oven appliance manager lost communication.F6E1Over temperature.F6E4User interface / Appliance manager state status mismatch.F6E8Lost communications with microwave oven appliance manager.F6EAUser interface over temperature.F9E0Product not wired correctly.

Service modes (10)

Cavity Size Select["Enter Diagnostics mode by pressing CANCEL>CANCEL>START","Press the 3 or 6 keypad to scroll to the…
cavity_size_select1
diagnostic1
Diagnostics mode["Press CANCEL","Press CANCEL","Press START"]
Error Code View/Clear["Enter Diagnostics mode by pressing CANCEL>CANCEL>START","Press the 3 or 6 keypad to scroll to the…
error_code_view1
Relay Activation["Enter Diagnostics mode by pressing CANCEL>CANCEL>START","Press the 3 or 6 keypad to scroll to the…
relay_activation1
Status Screen["Enter Diagnostics mode by pressing CANCEL>CANCEL>START","Status screen is displayed first upon…
status_screen1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass