Model reference

Whirlpool RF314PXMQ2

Name: Whirlpool RF314PXMQ2
Brand: Whirlpool

Range

2 documents15 error codes16 service modes

Available documentation

Tech Sheet

Service Tech Wiring Sheet Range Whirlpool Estate RF314PXMQ1 RF314PXMQ2 RF314PXMQ3 TEP340TQ04 pg
Covers this model

Service Manual

ELECTRIC RANGE Use & Care Guide28 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool RF314PXMQ2.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Range

End on my Whirlpool RF314PXMQ2

M+

End of a timed cooking or self-cleaning

From Tech Sheet W11428625, p.37:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (15)

CodeMeaning

EndEnd of a timed cooking or self-cleaning cycle; the oven has shut off…F1E0EEPROM communications error.F1E1EEPROM checksum failure.F1E2UL A/D error(s).F2E0Shorted key.F2E1Keytail unplugged.F3E0Oven sensor opened.F3E1Oven sensor shorted.F3E2BAKE/BROIL range over temperature.F3E3CLEAN range over temperature.F5E0Door and switches do not agree.F5E1Door latch not operating.F5E2Latch error during CLEAN.LocControl Lock is engaged; control panel pads are disabled to prevent unintended…PFPower failure has occurred; display shows 'PF' or a flashing time when power is…

Service modes (16)

12-Hour Shut-Off Toggle (Style 1)["Press and hold DELAY for 5 seconds.","'12 HR SHUT-OFF ON' will appear on the display.","Press and…
All Tones Toggle (Style 1)["Press and hold CLOCK for 5 seconds.","'ALL SOUNDS OFF' will appear on the display.","Repeat to…
All Tones Toggle (Style 2)["Press and hold STOP TIME for 5 seconds.","'Snd OFF' will appear on the display.","Press and hold…
Control Lock["Make sure the oven and Timer are off.","Press and hold the 'Lock' key for 5 seconds.","A single…
End of Cycle Tones Toggle (Style 1)["Press and hold CONVECT for 5 seconds to turn END OF CYCLE TONES off.","Press and hold CONVECT for…
Fahrenheit/Celsius Toggle (Style 1)["Press and hold AUTO CLEAN for 5 seconds.","'TEMPERATURE UNIT CELSIUS' will appear in the…
Fahrenheit/Celsius Toggle (Styles 2 & 3)["Press and hold BROIL for 5 seconds.","Repeat to change back to Fahrenheit."]
Key Press Tones Toggle (Style 1)["Press and hold WARM (Cooking Options) for 5 seconds.","'KEY PRESS TONES OFF' will appear on the…
Last Error Code RecallPress and hold CANCEL/OFF key for 5 seconds to display last error code.
Oven Temperature Calibration Adjustment (Style 1)["Press and hold OVEN LIGHT for 5 seconds until the oven display shows the current calibration…
Oven Temperature Calibration Adjustment (Styles 2 & 3)["Press and hold BAKE for 5 seconds until the oven display shows the current calibration (e.g…
Reminder Tones Toggle (Style 1)["Press and hold BAKE for 5 seconds.","'REMINDER TONES OFF' will appear on the display.","Repeat to…
Reminder Tones Toggle (Style 2)["Press and hold TIMER SET for 5 seconds.","'rEP OFF' or 'OFF' will appear in the display.","Repeat…
Temperature Calibration AdjustmentPress and hold BAKE pad for 5 seconds
Tone Pitch Toggle (Style 1)["Press and hold BROIL for 5 seconds.","'TONE PITCH LOW' will appear on the display.","Repeat to…
Tone Pitch Toggle (Style 2)["Press and hold DELAY START for 5 seconds.","'Snd LO' will appear on the display.","Repeat to…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass