mypros+
Model reference

Whirlpool RF368LXPT3

Range

3 documents16 error codes17 service modes

Available documentation

Tech Sheet

  • Whirlpool Range RF368LXPS0 Tech Sheet 97562074 pg
    Covers this model

Service Manual

  • ELECTRIC RANGE Use & Care Guide28 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for WHIRLPOOL AND KITCHENAID SLIDE-IN & FREESTANDING GAS & ELECTRIC RANGES80 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool RF368LXPT3.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (16)

CodeMeaning
EndEnd of a timed cooking or self-cleaning cycle; the oven has shut off…F0 E0No error(s) found (Good)F1 E0EEPROM communications error.F1 E1EEPROM checksum failure.F1 E2UL A/D error(s).F2 E0Shorted key / Stuck key.F2 E1Keytail unplugged.F3 E0Oven sensor opened.F3 E1Oven sensor shorted.F3 E2BAKE/BROIL range over temperature.F3 E3CLEAN range over temperature.F5 E0Door and switches do not agree.F5 E1Door latch not operating.F5 E2Latch error during CLEAN.LocControl Lock is engaged; control panel pads are disabled to prevent unintended…PFPower failure has occurred; display shows 'PF' or a flashing time when power is…

Service modes (17)

  • 12-Hour Shut-Off Toggle (Style 1)["Press and hold DELAY for 5 seconds.","'12 HR SHUT-OFF ON' will appear on the display.","Press and…
  • All Tones Toggle (Style 1)["Press and hold CLOCK for 5 seconds.","'ALL SOUNDS OFF' will appear on the display.","Repeat to…
  • All Tones Toggle (Style 2)["Press and hold STOP TIME for 5 seconds.","'Snd OFF' will appear on the display.","Press and hold…
  • Control Lock["Make sure the oven and Timer are off.","Press and hold the 'Lock' key for 5 seconds.","A single…
  • diagnostic test modeWithin 60 seconds of power up, simultaneously hold down the BAKE and CLOCK keys for 5 seconds
  • End of Cycle Tones Toggle (Style 1)["Press and hold CONVECT for 5 seconds to turn END OF CYCLE TONES off.","Press and hold CONVECT for…
  • Fahrenheit/Celsius Toggle (Style 1)["Press and hold AUTO CLEAN for 5 seconds.","'TEMPERATURE UNIT CELSIUS' will appear in the…
  • Fahrenheit/Celsius Toggle (Styles 2 & 3)["Press and hold BROIL for 5 seconds.","Repeat to change back to Fahrenheit."]
  • Key Press Tones Toggle (Style 1)["Press and hold WARM (Cooking Options) for 5 seconds.","'KEY PRESS TONES OFF' will appear on the…
  • last fault code displayPress and hold CANCEL/OFF key for 5 seconds until last error code is displayed.
  • Oven Temperature Calibration Adjustment (Style 1)["Press and hold OVEN LIGHT for 5 seconds until the oven display shows the current calibration…
  • Oven Temperature Calibration Adjustment (Styles 2 & 3)["Press and hold BAKE for 5 seconds until the oven display shows the current calibration (e.g…
  • Reminder Tones Toggle (Style 1)["Press and hold BAKE for 5 seconds.","'REMINDER TONES OFF' will appear on the display.","Repeat to…
  • Reminder Tones Toggle (Style 2)["Press and hold TIMER SET for 5 seconds.","'rEP OFF' or 'OFF' will appear in the display.","Repeat…
  • temperature adjustmentPress and hold BAKE pad for 5 seconds. Current offset is shown in 3-digit display. CAL is shown in…
  • Tone Pitch Toggle (Style 1)["Press and hold BROIL for 5 seconds.","'TONE PITCH LOW' will appear on the display.","Repeat to…
  • Tone Pitch Toggle (Style 2)["Press and hold DELAY START for 5 seconds.","'Snd LO' will appear on the display.","Repeat to…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass