Model reference

Whirlpool YKERI204PW2

Range

3 documents30 error codes1 service mode

Available documentation

Tech Sheet

TECH SHEET12 pg
Covers this model

Service Flash

Service Pointer - Oven Temperature Calibration1 pg
Covers this model
Service Pointer - 8178524 (Oven Temperatures)1 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool YKERI204PW2.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Range

F0E0 on my Whirlpool YKERI204PW2

M+

No failure (default state).

From Tech Sheet W16096306, p.38:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (30)

CodeMeaning

F0E0No failure (default state).F1E0Internal error (display board related).F1E1Internal error (display board related).F1E2Internal error (display board related).F1E3Internal error (display board related).F1E4Internal error (display board related).F1E5Internal error (power board related).F1E6Internal error (power board related).F1E7Internal error (power board related).F1E8Internal error (power board related).F1E9Internal error (display board related).F2E0Stuck key (shorted key) on keypad.F2E1Keypad disconnected.F3E0Main oven sensor open (top oven sensor opened).F3E1Main oven sensor shorted (top oven sensor shorted).F3E2Meat probe shorted.F3E4Bottom oven sensor open (bottom/lower oven sensor open).F3E5Bottom oven sensor shorted (lower oven sensor shorted).F3E6Warming drawer sensor open.F3E7Warming drawer sensor shorted.F4E2Over temperature during cook mode (temperature runaway).F4E3Over temperature during clean mode (temperature runaway).F4E7Over temperature cavity 2 (temperature runaway error).F5E0Door latch mismatch F5E1No operating latch F5E2Door switch fault.F5E4Latch switch fault.F5E7Unlock door error F6E4Lost communication between display board and power board.F6E5Cancel key error.

Service modes (1)

Diagnostic mode["Press the Cancel key to place the range in an idle state.","Press the Cancel and Start keys in…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass