mypros+
Model reference

Whirlpool W11320651B

Washer

1 document28 error codes5 service modes

Available documentation

Tech Sheet

  • Whirlpool Control Panel Service Technical Sheet28 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool W11320651B.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (28)

CodeMeaning
F0E1Load detected in drum during Clean Washer cycle.F0E2OversudsF0E4High temperature error during wash cycle.F0E5Off balance load detected.F1E1Main relay open or shorted.F1E2MCU over- or under-voltage error.F3E1Pressure sensor signal missing or out of range.F3E2Wash NTC (thermistor) open or shorted.F3E5Dry NTC faultF3E6Accelerometer error.F4E1Wash heater relay error or no feedback signalF4E2Wash heater relay error.F5E2Door lock failure.F5E3Door unlock failure.F5E4Door not open error.F6E1No communication from the HMI detected by ACU.F6E2No communication from the ACU detected by the HMI.F6E3No communication from the MCU detected by the ACU.F7E10Motor disconnected error.F7E12MC/MCU overload.F7E2MC/MCU over temperature error or over current error/internal failure.F7E8MC/Motor over temperature error.F7E9Motor will not turn (locked rotor).F7EAMotor disconnected error (alternate hex display of F7E10).F7ECMC/MCU overload (alternate hex display of F7E12).F8E1Water inlet valve failure.F8E3Overflow condition detected.F9E1Long drain

Service modes (5)

  • Fault/Error Code Display["Enter Service Diagnostic Mode
  • Human-Machine Interface Test["First activate Service Diagnostic Mode.","Press and release the 1st button used to activate…
  • Quick Diagnostic Test["First activate Service Diagnostic Mode.","Press and release the 2nd button used to activate…
  • Service Diagnostic Mode["Ensure washer is in standby mode (plugged in with all indicators off).","Wait 30 seconds after…
  • Software Version Display["First activate Service Diagnostic Mode.","Press and hold the 2nd button used to activate Service…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass