mypros+
Model reference

Whirlpool W11449146

Washer

1 document26 error codes9 service modes

Available documentation

Tech Sheet

  • Tech Sheet - W11449146 - Rev C24 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool W11449146.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (26)

CodeMeaning
F0E4Off balance load detected during cycle operation.F1E1A fault has occurred in the main control.F1E7Control board recognized line voltage below 90 V AC.F2E1Washer keypad is sensed pressed for continued duration.F3E1Main control detects an out of range pressure signal.F3E2Inlet thermistor is detected to be open or shorted.F5E1Lid is in locked state but lid switch is open; main control cannot detect the…F5E3Lid lock has not moved into locked position or motor cannot be powered; lid not…F5E4Lid lock has not moved into unlocked position or motor cannot be powered.F7E1Main control cannot determine speed of basket, or speed changes too quickly…F7E5Main control cannot determine position of shifter.F7EDFault of the motor control section of the main control.F8E1No fillF8E3Overflow conditionF9E1Long drainFCE1No model/serial number information is saved on the machine's controls.FCE2Model/serial number information saved on the machine's controls is not the same…FCE3Wi-Fi connection fault.FCE4USB stick failure (USB full, not detected, or not accessible).FCE5Software uploaded from USB stick does not match the model number of machine.FCE6Download of machine setup from machine to USB stick failed.FCE7Upload of machine setup from USB stick to machine failed; machine number from…FCE8Wi-Fi module not responding or not connected.FPE1Coin 1 circuit error.FPE2Coin 2 circuit error.FPE3Card reader communication error.

Service modes (9)

  • Calibration Cycle (P-05)["Enter Service Diagnostic Test Modes.","Press MIXED keypad until 'P-05' is displayed.","Press…
  • Help Mode["Enter Service Mode.","Use MIXED keypad to advance to program location 2.xx (Special Pricing…
  • Manual Overview Test (P-04)["Enter Service Diagnostic Test Modes.","Press MIXED keypad until 'P-04' is displayed.","Press…
  • Quick Overview Test (P-03)["Enter Service Diagnostic Test Modes.","Press MIXED keypad until 'P-03' is displayed.","Press…
  • Service Diagnostic Test Modes["For coin models
  • Set-Up Mode (Control Programming)["Coin Models
  • Tachometer Verification (P-09)["Enter Service Diagnostic Test Modes.","Press MIXED keypad until 'P-09' is displayed.","Press…
  • Technician Service Access Code (Non-Coin Free Vend models only)["Press the HEAVY DUTY, EXTRA RINSE, TEMPERATURE, and DELICATES keypads within 10 seconds."]
  • UI Diagnostics (P-07)["Enter Service Diagnostic Test Modes.","Press MIXED keypad until 'P-07' is displayed.","Press…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass