mypros+
Model reference

Wolf CT36E/S-2

Cooktop

3 documents45 error codes6 service modes

Available documentation

Service Manual

  • CT Electric Cook Top Service Manual44 pg
    Covers this model
  • Service Manual Electric Cooktop-2 (CTE-2) Series5 pg
    Covers this model
  • Technical Service and Parts Manual Electric Cooktop-2 Series62 pg
    Covers this model
MyPros+ Max

Diagnose your Wolf CT36E/S-2.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (45)

CodeMeaning
E01Power module ambient temperature has reached or exceeded its temperature limit…E02Power module heat sink temperature has reached or exceeded its temperature…E05Power module ambient temperature sensor indicates a disconnected (open) sensor.E06Power module ambient sensor is shorted to heatsink sensor.E07The power module reports an inconsistent model value to the display board.E08Display board is unable to communicate to the keyboard.E09Keyboard internally detects communications errors and reports this back to the…E10Display board is unable to communicate to the power module.E11Power module is unable to communicate to the display board (visible only if…E13Keyboard internally tests for key opens, shorts, and signal quality issues and…E14Keyboard detects internal EEPROM failure and reports to the display board.E15Keyboard internally recalibrates periodically and reports calibration failure…E16Keyboard internally detects CRC communications errors and reports this back to…E17Failure of the Keep Alive capacitor to discharge after a Keep Alive recovery…E18Power board EEPROM CRC failure; EEPROM records individually tested with…E19Run time diagnostics detected a shorted relay or triac on the power module.E20Power module relay power circuit fault (element supervisor fail) was detected.E30Display board detected that the least significant digit of a display bar graph…E50Power module heatsink thermistor has a value indicating a disconnected (open)…E56Power module microcontroller Flash memory CRC failure.E57Display board microcontroller Flash memory CRC failure.E58Power module microcontroller configuration fuse failure.E59Display board microcontroller configuration fuse failure.E60Power module internal error (invalid internal state).E63Display board zero-cross signal failure.E64Self test resultE65Self test resultE66Self test resultE67Self test resultE69Power module microcontroller internal RAM/Register error.
View all 45 error codes
E70Display board microcontroller internal RAM/Register error.E71Self test resultE72Self test resultE73Self test resultE74Self test resultE75Self test resultE76Self test resultE77Self test resultE78Self test resultE79Self test resultE80Self test resultE81Self test resultE82Self test resultE83Self test resultE84Self test result

Service modes (6)

  • diagnostic1. Cooktop must be in LOCK mode. 2. Touch and hold the [OFF] keypad for 5 seconds. 3. A beep will…
  • Diagnostic Mode["Ensure the cooktop is in LOCK mode.","Press and hold the [OFF] key for 5 seconds.","A beep will…
  • lockTouch and hold the [Key] symbol for 3 seconds
  • Lock Mode["Press and hold the LOCK KEY for 3 seconds.","The unit will beep 3 times and the light within the…
  • showroom1
  • Showroom Mode["Ensure the cooktop is in LOCK mode.","Press and hold the front element MELT key for 5…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Wolf cooktop models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax