Crosley Range Error Code F10

F10 on a Crosley range means the oven's electronic control board has detected a fault or error condition and is alerting you that something is outside of normal operating parameters. It is a general fault code rather than a code tied to one specific component. The oven will stop normal operation and beep until the error is addressed. Pressing Clear/Off and performing a power reset are the recommended first steps.

You should not continue using the oven while the F10 code is active, as the control board has flagged an error and interrupted normal operation for a reason. Attempting to override or ignore the fault could lead to improper heating or unpredictable oven behavior. Perform the recommended reset procedure first, and if the code returns, avoid using the oven until a technician has inspected it.

Repair costs depend on the root cause identified during diagnosis. If the fix is simply a wiring connection, costs are generally lower, typically in the range of 75 to 150 dollars for a service call. If the electronic control board needs to be replaced, total repair costs including parts and labor commonly fall in the range of 200 to 400 dollars, depending on part availability and local labor rates.

In many cases, yes. Pressing Clear/Off to stop the beeping and then removing power from the appliance for at least 5 minutes can clear a transient F10 fault caused by a power fluctuation. After restoring power, set the clock and test the bake or broil function. If the F10 code returns after reset, the underlying cause is not a simple glitch and a service call is needed.

Start by pressing Clear/Off to clear the display, then unplug the range or turn off the circuit breaker for 5 minutes. Restore power, set the clock, and test the bake or broil function again. If the F10 error does not return, the issue was likely a transient power event. If it recurs, record the fault and contact a qualified appliance technician to diagnose whether the control board, wiring, or another component needs to be repaired or replaced.