Crosley Range Error Code F14

F14 on a Crosley range means the oven control board has detected a fault or error condition. This is a general control-level fault that can result from a temporary glitch, a power irregularity, or a hardware issue. The code is displayed to stop oven operation and alert the user that service attention may be needed.

It is not recommended to continue using the oven while the F14 fault is active. The control board may not be regulating cooking temperatures or broil functions properly in a fault state, which could result in uneven cooking or unsafe operation. Clear the fault and confirm normal operation before using the appliance again.

If the fault clears with a reset, there is no repair cost. If the control board needs to be replaced, repair costs typically range from around $150 to $400 or more depending on parts and labor rates in your area. A technician visit to diagnose the issue will usually run between $75 and $150 for the service call alone.

In many cases, yes. Press Clear/Off to stop the beeping, then try using the bake or broil function again. If the code returns, disconnect power to the range for 5 minutes, restore power, set the clock, and try again. If F14 continues to appear after this full reset procedure, the problem is likely a hardware fault requiring service.

Start by pressing Clear/Off to dismiss the code, then test the bake or broil function. If the error returns, remove power from the range for 5 minutes, restore power, reset the clock, and test again. If F14 persists after this procedure, record the fault code and contact a qualified appliance technician, as the control board or a connected component may need to be inspected or replaced.