mypros+
Error code reference

Crosley Range Error Code F30

The oven control system has detected a fault or anomaly (example code shown in manual; any code beginning with F indicates a control system fault).

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the F30 error code actually means

Your Crosley range has detected a problem with its internal control system and is displaying this code to let you know something isn't right. The oven has stopped normal operation as a precaution. Pressing CLEAR OFF and resetting the power may resolve it if the issue was caused by a brief power surge or glitch.

Diagnostic procedure

The full F30 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Press CLEAR OFF to clear the displayed code and stop the audible signal. Attempt to use BAKE or BROIL functions again. If the F error code reappears, disconnect power for 5 minutes, reconnect, reset the clock, and try BAKE or BROIL again. If the problem persists, record the error code and call an authorized service agent.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F30 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of F30

Ranked by how often they cause this code
  1. 1Transient power surge or voltage fluctuation
  2. 2Electronic oven control board failure
  3. 3Faulty or disconnected oven temperature sensor
  4. 4Loose or corroded wiring connections
  5. 5Control board memory corruption

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about F30

What does F30 mean on a Crosley range?
The F30 code indicates that the electronic oven control system has detected a fault or anomaly. It is part of the F-series fault framework, where any code beginning with F signals a control system issue. The oven will sound an audible alert and suspend normal cooking functions when this code appears. It can be caused by anything from a brief power surge to a hardware failure in the control board or a connected sensor.
Is it safe to use my Crosley range when the F30 code is showing?
You should not attempt to operate the oven while an F30 fault is active. The control system has suspended normal operation as a precaution, and attempting to override it is not recommended. Clear the code first, perform a power reset if needed, and only resume use if the code does not return. If the fault persists, stop using the oven and contact a qualified technician.
Can I diagnose the F30 code myself or do I need a technician?
A homeowner can safely perform the initial steps of pressing CLEAR OFF, attempting normal operation, and completing a five-minute power disconnect and reset. Visually inspecting accessible wiring connectors for obvious damage is also reasonable. However, if the code persists after these steps, further diagnosis requires disassembling the range and testing components, which is best handled by a qualified appliance technician.
Will resetting the range clear the F30 code?
Pressing CLEAR OFF will stop the audible alarm and clear the displayed code. If a simple reset does not keep the code from returning, disconnect power to the range for at least five minutes, then reconnect and reset the clock before attempting to use BAKE or BROIL again. If the F30 code comes back after this full power-cycle reset, the fault is likely persistent and requires service.
How much does it cost to fix an F30 error on a Crosley range?
Repair costs vary depending on the root cause. If the fault is due to a transient power event, there is no parts cost involved. If the electronic control board needs replacement, parts and labor typically range from around $150 to $400 or more depending on the specific board and local labor rates. A temperature sensor replacement is generally less expensive, usually falling in the $75 to $200 range including labor.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass