Crosley Washer Error Code 06

Error code 06 indicates a locked rotor fault, meaning the washer's motor did not turn after 10 consecutive attempts to start it. The motor control board detected a stalled or non-rotating motor and shut the machine down to prevent damage. The fault can stem from a mechanical blockage, a failed motor, a bad motor control board, or a wiring problem.

A power reset may temporarily clear the fault code and allow the washer to attempt operation again, but if the underlying mechanical or electrical problem is still present, the machine will retry up to 10 times and trigger error code 06 again. A reset does not repair the root cause, so repeated resets without fixing the problem risk further damage to the motor or control board.

Repair costs vary depending on the root cause. Clearing a physical obstruction yourself costs nothing beyond your time. A replacement motor typically ranges from $80 to $200 or more for parts, while a motor control board can range from $100 to $300 depending on the model. Adding professional labor, total repair costs can run from $150 to $450 or higher, so it is worth getting a diagnostic assessment before authorizing parts replacement.

Some causes, such as a foreign object blocking the drum, can be resolved without special tools by unplugging the washer and manually clearing the obstruction. Electrical repairs involving the motor control board or motor replacement typically require a multimeter, comfort working with appliance wiring, and familiarity with the Motor Control Board Output Test procedure. If you are not confident working with appliance electronics, a qualified technician is recommended.

No, the washer should not be operated while this fault is active. The code indicates the motor is failing to turn, and forcing repeated start attempts without resolving the cause can overheat the motor windings or damage the motor control board. Unplug the unit until the fault is properly diagnosed and repaired.