Crosley Washer Error Code 11

Error code 11 on a Crosley washer signals a non-volatile memory error, meaning the machine control board is having difficulty reading its internal stored data. This memory holds the operational parameters the washer needs to run cycles correctly. The washer stops operation and displays this code to prevent further problems until the issue is resolved.

A reset, performed by unplugging the power cord and reconnecting it, may clear error code 11 if the memory fault was caused by a temporary event such as a power surge. However, if the control board's non-volatile memory is permanently corrupted or the board has failed, the error will return after the reset and board replacement will be necessary.

If a simple power cycle clears the error, there is no parts cost involved. If the machine control board needs to be replaced, you can expect to pay somewhere in the range of $150 to $350 or more depending on parts pricing and whether you hire a technician. DIY replacement can reduce costs if you are comfortable working on appliance electronics.

The first step you can take yourself is to clear the diagnostic code list and then unplug the washer from the power outlet, wait a few minutes, and plug it back in. If the error does not return, the issue was likely a temporary memory read failure caused by a power fluctuation. If the code comes back after the power cycle, the machine control board will need to be replaced, which is a more involved repair.

You should not attempt to run wash cycles while error code 11 is active. The washer cannot reliably read its stored operational data, which means it may not control cycle functions correctly. It is best to resolve the error before using the machine to avoid potential issues with water filling, draining, or motor operation.