Crosley Washer Error Code E38

E38 on a Crosley washer signals a problem with the water level sensing system. Either the air chamber that helps measure water level is clogged, or the pressure sensor that reads that level is defective. The washer displays this code when it cannot accurately determine how much water is in the tub, which prevents normal cycle operation.

A reset may temporarily clear the E38 code, but it will return if the underlying cause is not addressed. If the air chamber is clogged or the pressure sensor is defective, the fault will reappear once the washer attempts to fill again. A reset is useful for confirming whether the issue is persistent, but it is not a fix.

If the air chamber or hose simply needs cleaning, the repair can cost little to nothing beyond your time. If the pressure sensor needs replacement, parts typically range from $20 to $60 depending on the specific model, with professional labor adding $80 to $150 or more depending on your location and service provider.

Start by locating and inspecting the air chamber and the small hose that connects it to the pressure sensor. Clean any soap residue or mineral buildup from both the chamber and the hose. If cleaning does not clear the error, the pressure sensor should be tested and replaced if found to be faulty.

It is not recommended to continue running the washer while E38 is active. The error indicates the washer cannot reliably measure water levels, which could lead to overfilling, incomplete cycles, or water damage. Resolve the fault before resuming normal use.