Crosley Washer Error Code E43

E43 means the console control board has determined that the door locking device has failed or is not responding correctly. The washer monitors the door lock circuit continuously, and this code appears when the expected electrical feedback from the lock assembly is not received. The washer will not run normally until the fault is resolved to ensure safe operation.

A reset may temporarily clear the E43 code, but it will return if the underlying problem with the door lock assembly or its circuit has not been fixed. The control board will re-detect the fault the next time it monitors the lock system. Addressing the root cause is necessary to permanently resolve the error.

Repair costs vary depending on the failed component. A replacement door lock assembly typically costs between $20 and $75 for parts, and if you hire a technician, labor charges can add $80 to $150 or more. If the console control board needs replacement, parts alone can range from $100 to $250, making professional repair more expensive. Getting a diagnostic estimate before committing to board replacement is advisable.

Some causes of E43 are within reach for a knowledgeable DIYer. Start by inspecting the door for proper alignment and checking wiring connectors at the door lock assembly for looseness or damage. If the lock assembly itself has failed, replacing it is a straightforward repair with basic tools. However, if the control board is at fault, that repair is more involved and may warrant professional service.

It is not recommended to bypass or ignore E43. The door lock is a safety component designed to prevent the door from opening during a spin cycle. If the lock is genuinely faulty, operating the washer could pose a safety risk. The washer is designed to halt operation when this fault is detected for that reason.