Crosley Washer Error Code E58

E58 means the washer has detected high current on a motor phase, triggering a protective fault to prevent damage to the motor or motor control board. The control system monitors current levels across each motor phase during operation, and E58 appears when current exceeds the acceptable limit. This fault requires diagnosis of the motor, wiring harness, and motor control board to determine the root cause.

No, you should not continue running the washer while E58 is active. The code indicates an overcurrent condition that the control system flagged to protect the motor and electronics from damage. Repeated attempts to run the machine without resolving the fault can cause further harm to the motor control board or motor windings.

Repair costs vary depending on which component is at fault. If the issue is a damaged wiring harness, costs are generally lower, typically in the range of $50 to $150 for parts and labor. A motor replacement can run from $150 to $350 or more depending on labor rates, while a motor control board replacement typically falls in the $100 to $300 range. Getting a diagnostic assessment before committing to parts is recommended.

Some aspects of diagnosing E58 are accessible to knowledgeable DIYers, such as checking for drum obstructions, inspecting the motor wiring harness for visible damage, and clearing the fault to test if it returns. However, testing motor winding resistance and evaluating the motor control board requires a multimeter and comfort working with appliance electronics. If the motor or control board needs replacement, a qualified technician may be advisable.

A reset may temporarily clear the E58 code, but if the underlying cause is still present, the fault will return as soon as the washer attempts to run the motor again. Resetting without diagnosis is not a solution and can mask a worsening problem. Performing the prescribed test (9) diagnostic sequence is the correct approach to properly resolving this fault.