Crosley Washer Error Code E59

E59 means the washer control board detected no tachometer signal from the drive motor for three seconds. The tachometer is a speed sensor integrated with the motor that tells the control board how fast the motor is spinning. When this signal is lost, the washer stops to prevent damage. The fault can originate from the motor itself, the drive belt, the tacho winding, or the wiring harness.

No, you should not continue running the washer while E59 is active. The error indicates the control board cannot confirm the motor is operating correctly, and running the machine in this state risks damaging the motor, control board, or other components. Stop the cycle, unplug the washer, and diagnose the fault before attempting further use.

Repair costs depend heavily on which component has failed. A replacement drive belt is generally an inexpensive part, typically in the range of $10 to $30. A replacement drive motor can cost between $80 and $200 or more for the part alone. If a motor control board is needed, parts costs can range from $100 to $300. Adding professional labor will increase the total, usually by $75 to $150 per hour depending on your area.

Some causes of E59 are accessible to a confident DIYer. Checking and replacing a broken drive belt is a straightforward repair on most Crosley washers. Inspecting the wiring harness for loose or corroded connections is also manageable without specialized tools. However, diagnosing a failed tacho winding or a faulty control board typically requires a multimeter and some comfort with appliance disassembly, so those steps may be better handled by a qualified technician.

A reset may temporarily clear the code from the display, but it will not resolve the underlying fault. If the cause, such as a broken belt, failed tacho winding, or wiring issue, is not corrected, the E59 error will return as soon as the washer attempts to run the motor again. Always address the root cause before returning the machine to service.