Crosley Washer Error Code E68

E68 on a Crosley washer means the control board has detected either a current leakage to ground in the heater circuit or an opened thermal fuse. Both conditions point to a failure in the water heating system. The washer triggers this code as a safety measure to prevent electrical hazards or further damage to components.

Yes, E68 should be treated as a safety-related fault. A current leakage to ground on the heater means electricity is traveling an unintended path, which can create a shock hazard or risk of fire if left unaddressed. Do not continue to operate the washer until the fault has been diagnosed and the affected component has been repaired or replaced.

A power reset may temporarily clear the displayed error code, but E68 will return as soon as the control board performs its heater circuit check again if the underlying fault is still present. Because this code relates to a physical component failure such as a blown fuse or a leaking element, no amount of resetting will resolve the issue. The faulty component must be tested and replaced before the code will clear permanently.

A knowledgeable DIYer with a multimeter can perform the diagnostic tests to identify whether the heating element or thermal fuse is the cause. Testing involves checking the element for continuity, ground leakage, and inspecting the fuse for continuity. Replacing a thermal fuse is a relatively straightforward repair, while replacing the heating element requires disconnecting the appliance from power and accessing the heater housing, which carries more risk if you are not comfortable working with appliance wiring.

Repair costs depend on which component has failed. A thermal fuse is a relatively inexpensive part, typically in the range of $5 to $25 for the component itself. A replacement heating element generally costs more, often in the range of $20 to $80 depending on the specific model. If a technician is performing the repair, labor costs will add to the total.