Crosley Washer Error Code E71

E71 on a Crosley washer indicates a Wash NTC failure, meaning the control board is not receiving a valid signal from the temperature sensor located at the wash tub. The NTC thermistor monitors water temperature, and when its resistance reading falls outside acceptable limits, the washer triggers this fault code. The first diagnostic step is to test the resistance of the tub NTC directly using Test 15 in the diagnostic procedure.

It is not recommended to continue running the washer while E71 is active. The machine uses the NTC sensor reading to control water temperature, and operating without a valid sensor signal could result in improper wash temperatures or uncontrolled heating. The washer will typically stop the cycle when this code appears, which is a protective measure that should be respected until the fault is resolved.

Resetting the washer may temporarily clear the E71 code, but if the underlying fault with the NTC sensor or wiring remains, the error will return once the machine attempts to read the temperature during a wash cycle. A reset is not a fix and should only be used as part of the diagnostic process to confirm whether the fault is persistent or intermittent. Proper resistance testing of the tub NTC is necessary to resolve the issue permanently.

A knowledgeable DIYer can address E71 by testing the tub NTC thermistor resistance with a multimeter and inspecting the wiring harness and connectors for damage or corrosion. If the sensor resistance is out of range, replacing the NTC thermistor is a straightforward repair. However, if the wiring or control board is involved, additional technical skill and care around electrical components are required.

If only the NTC thermistor needs replacement, parts costs are generally in the range of $15 to $50 depending on the specific model, with professional labor adding $75 to $150 or more. If the control board is the source of the fault, parts alone can range from $100 to $300 or higher, making that a more significant repair. Getting a diagnostic assessment first helps avoid unnecessary part replacement.