Crosley Washer Error Code EF2

EF2 on a Crosley washer means the machine has detected an excess suds condition inside the drum or drain system. This is typically caused by using too much detergent or using a non-HE detergent in a high-efficiency washer. The washer may pause or extend its cycle to allow suds to dissipate before continuing. Reducing detergent use and switching to an HE-rated product resolves the error in most cases.

An EF2 error does not indicate a mechanical or electrical hazard, so the washer is generally safe to operate. However, excessive suds can impair rinsing, leave detergent residue on clothing, and interfere with draining. It is best to address the detergent issue before running additional cycles to avoid repeated faults and potential strain on the drain system.

In most cases, fixing EF2 costs nothing beyond purchasing the correct HE detergent, which typically ranges from $10 to $25 per container. No parts or service calls are usually required since the error is related to detergent use rather than a component failure. If a technician visit is needed to diagnose a persistent or unexplained suds issue, service call fees generally range from $75 to $150 depending on your location.

The first step is to reduce the amount of detergent you are using and ensure you are using a detergent labeled as HE. Allow the current cycle to finish or cancel it and run a rinse-only cycle to clear excess suds from the drum. If buildup is present in the dispenser drawer or drum, clean these areas before running another load. Going forward, follow the detergent manufacturer's dosing guidelines for your load size and water conditions.

Resetting the washer may clear the EF2 code temporarily, but the error will return if the underlying cause is not addressed. The excess suds condition must be resolved by reducing detergent quantity or switching to an HE detergent. Running an additional rinse cycle after a reset can help remove residual suds before attempting a new wash cycle.