Crosley Washer Error Code FL

FL means the washer tried to lock the door multiple times but could not confirm it was locked. The machine stops operation as a safety measure to prevent running a wash cycle with an unsecured door. The cause can range from a door that is not fully closed to a faulty lock assembly or wiring issue.

No, you should not force the machine to operate while the FL code is active. The error exists specifically to prevent the washer from running with an unlocked door, which could allow the door to open during a cycle and cause water damage or injury. Resolve the underlying cause before running any cycles.

Repair costs depend on what is causing the fault. If the fix is simply a door alignment adjustment or clearing an obstruction, there may be no parts cost. Replacing a door lock assembly typically costs in the range of $20 to $80 for the part, plus labor if a technician is involved. A wiring harness repair or control board replacement would generally cost more, with total repair bills ranging from $100 to $300 or higher depending on the component.

Start by opening and firmly reclosing the door, making sure no laundry is caught in the seal or door opening. If the code returns, inspect the door latch and lock assembly for visible damage or wear. Persistent FL errors after confirming the door closes properly typically require testing the lock assembly, wiring harness, and potentially replacing the lock unit.

A reset may temporarily clear the code, but if the underlying problem is not fixed the error will return as soon as the machine attempts to lock the door again. Resetting is useful for ruling out a one-time glitch, but a recurring FL code points to a component or alignment issue that needs to be addressed directly.