mypros+
Error code reference

Crosley Washer Error Code LO

Door is locked and the machine has repeatedly tried to unlock but cannot.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the LO error code actually means

Your Crosley washer's door is stuck in the locked position, and the machine has tried multiple times to unlock it without success. This could be something as simple as laundry pressing against the door from the inside, or it could mean the door lock mechanism itself has failed. Until the issue is resolved, the door will remain locked and the washer will not operate normally.

Diagnostic procedure

The full LO procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Push door closed to make sure nothing from the inside is pressing against the door which may keep it from unlocking.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock LO procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of LO

Ranked by how often they cause this code
  1. 1Obstruction inside the drum pressing on the door
  2. 2Failed door lock actuator
  3. 3Worn or damaged door latch strike
  4. 4Wiring harness fault between door lock and control board
  5. 5Faulty main control board

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about LO

What does LO mean on a Crosley washer?
The LO code means the washer door is locked and the machine has repeatedly tried to unlock it without success. The control has detected that the unlock command is not resulting in the door latch releasing. This can be caused by a physical obstruction inside the drum, a failed door lock actuator, or a wiring issue. The washer will not resume normal operation until the door can be unlocked.
Will resetting my Crosley washer clear the LO error code?
A reset by unplugging the machine for several minutes may temporarily clear the code, but if the underlying cause is a failed door lock actuator or damaged wiring, the code will return once the machine tries to unlock the door again. A reset is a useful diagnostic step but is not a repair on its own. Persistent LO codes require inspection of the door lock assembly and related components.
How much does it cost to repair a Crosley washer showing the LO code?
Repair costs vary depending on the cause. If the issue is just a physical obstruction, there is no parts cost involved. A door lock assembly replacement typically costs between $50 and $150 for the part, plus labor if a technician performs the repair. If the main control board is at fault, part costs can range from $100 to $300 or more depending on availability. Getting a diagnosis before committing to a repair is recommended.
How do I fix the LO error code on my Crosley washer?
Start by pushing the door firmly closed to ensure nothing inside the drum is pressing against it, then see if the machine will retry the unlock sequence. If the door remains locked, unplug the washer for a few minutes before restoring power. If the code returns, the door lock assembly likely needs to be inspected and possibly replaced. A technician can test the assembly and wiring to confirm the exact cause.
Is it safe to leave my washer when the LO code is showing?
The washer will not operate a wash cycle while the door is locked in a fault state, so there is no risk of the machine running unattended. However, laundry left inside a sealed drum for an extended period can develop mildew odors. If the door cannot be unlocked, avoid forcing it, as this can damage the latch strike or door seal. Address the fault as soon as practical to retrieve laundry and prevent further issues.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass