Electrolux Cooktop Error Code E18

E18 on an Electrolux cooktop indicates that the control key sensor for the right front cook zone is defective. The cooktop has detected that the touch sensor in that zone is not operating within normal parameters. This typically points to a fault in the touch control assembly or in the wiring connecting it to the main power board.

The E18 fault specifically affects the right front burner zone. The other zones may continue to function, but operating a cooktop with a known sensor fault is not recommended for extended periods. A defective touch control could behave unpredictably, and it is best to have the issue diagnosed and repaired before relying on the appliance for regular cooking.

Repair costs vary depending on whether the fix requires only a wiring correction or a full touch control assembly replacement. If the fault is a loose connector, costs may be limited to a service call fee, typically in the range of $75 to $150. If the touch control module needs to be replaced, total costs including parts and labor generally fall in the range of $150 to $350, depending on the specific model and local labor rates.

A knowledgeable DIYer can start by checking the cable connections between the right front touch control and the main power board, since a loose connector is sometimes all that is causing the fault. If reseating connections does not clear the error, the right front cook zone touch control assembly will need to be replaced, which requires disassembling part of the cooktop and working near electrical components. If you are not comfortable with appliance disassembly, a qualified technician is the safer option.

Disconnecting the cooktop from power for a few minutes may temporarily clear the E18 code, but if the underlying sensor or wiring fault is still present, the error will return once the unit powers back up. A reset is useful for confirming whether the fault is intermittent, but it does not repair a defective touch control or damaged connection.