mypros+
Error code reference

Electrolux Cooktop Error Code E19

Right Front zone control key sensor defective.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E19 error code actually means

Your Electrolux cooktop is showing E19 because the touch sensor for the right front burner is not working correctly. This means the cooktop cannot reliably detect when you press that zone's controls, so it has shut down that function for safety. A technician will need to check the wiring and likely replace the touch control panel for that zone.

Diagnostic procedure

The full E19 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Test cables and connections on main power/right front cook zone touch control. Replace main power/right front cook zone touch control.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E19 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E19

Ranked by how often they cause this code
  1. 1Faulty right front touch control assembly
  2. 2Loose or disconnected cable connections
  3. 3Corroded or damaged connector pins
  4. 4Moisture ingress behind the touch panel
  5. 5Physical damage to the touch panel surface

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E19

What does E19 mean on a Electrolux cooktop?
E19 means the cooktop has detected a defect in the right front zone control key sensor. The touch control system monitors the sensor circuit for that burner position and triggers this code when it receives an invalid or missing signal. The right front cooking zone is typically disabled while this fault is active. Resolving it requires inspecting the wiring and connections or replacing the touch control assembly.
Will resetting the cooktop clear the E19 error?
A power reset, such as switching off the circuit breaker for one to two minutes and then restoring power, may temporarily clear the E19 code if the fault was caused by a transient signal issue or a loose connection. However, if the underlying sensor or wiring problem is not resolved, the code will return during normal use. A reset alone is not a fix for a defective touch control assembly.
How much does it cost to repair an E19 error on an Electrolux cooktop?
Repair costs depend on whether the issue is a loose connection or a failed touch control assembly. If only the wiring needs to be reseated, the cost is primarily the diagnostic labor fee, which typically ranges from $75 to $150. If the right front cook zone touch control assembly requires replacement, parts and labor combined can range from $150 to $400 or more depending on the specific cooktop model and local labor rates.
Can I fix E19 on my Electrolux cooktop myself?
A knowledgeable DIYer can start by checking that all cable connections to the right front cook zone touch control are fully seated and free of corrosion. If reseating the connectors does not clear the fault, the touch control assembly will need to be replaced, which involves disassembling the cooktop and working near electrical components. If you are not comfortable working with appliance wiring, a qualified technician should perform the repair.
Is it safe to use my Electrolux cooktop while E19 is displayed?
The right front cooking zone is generally disabled when E19 is active, which limits your ability to use that burner. Other zones may still function normally depending on the cooktop model. It is best to avoid using the appliance until the fault is diagnosed and repaired, as a defective touch sensor could behave unpredictably in some situations.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass