Electrolux Cooktop Error Code E22

E22 indicates that the timer key sensor in the touch control panel has been detected as defective. Specifically, the fault is associated with the main power and right front cook zone touch control assembly. The cooktop displays this code when the sensor is unresponsive, out of range, or producing unreliable signals. Diagnosis involves checking wiring connections before considering replacement of the touch control assembly.

It is not advisable to continue using the cooktop while the E22 fault is active. A defective sensor in the touch control panel could lead to unintended behavior, including difficulty controlling cook zones or timers. Power the cooktop off until the fault is diagnosed and resolved.

Repair costs vary depending on whether only wiring work is needed or a full touch control assembly replacement is required. Parts for the touch control module can range from roughly $80 to $250 or more depending on the specific model. Adding professional labor, total repair costs typically fall between $150 and $400. Getting a diagnostic estimate from a qualified technician before proceeding is recommended.

A knowledgeable DIYer can start by inspecting the cables and connectors on the main power and right front cook zone touch control for looseness or damage, and reseating them if needed. If the connections are fine, the touch control assembly itself will need to be replaced, which requires disassembling the cooktop and handling electrical components. If you are not comfortable working with appliance wiring, a qualified technician should perform the repair.

A power reset, such as switching off the circuit breaker for one to two minutes and restoring power, may temporarily clear the E22 code. However, if the timer key sensor or touch control assembly is genuinely defective, the error will return during operation. A reset alone is not a fix and does not address the underlying hardware fault.