GE Refrigerator Error Code 0573

Error code 0573 on a GE refrigerator signals a feature board hardware fault. The feature board controls user-facing functions such as the water and ice dispenser and the display panel inputs. This code means the refrigerator's control system has detected a physical failure within the feature board's circuitry. It is a hardware-level fault rather than a simple communication or software error.

A reset is unlikely to permanently clear error code 0573 because it indicates a hardware fault rather than a software or communication glitch. Unplugging the refrigerator for a few minutes may temporarily clear the code, but it will return if the underlying board hardware has failed. A lasting fix requires addressing the physical issue with the feature board.

Repair costs vary depending on what needs to be replaced. A feature board part alone typically falls in the range of $75 to $200 depending on the model, and adding labor for a service technician can bring the total to somewhere between $150 and $400. If the main control board is also involved, costs will be higher. Getting a diagnostic estimate from a qualified technician before committing to repairs is recommended.

Some basic checks are within reach for a handy homeowner. You can inspect the wiring harness connections to the feature board and reseat any loose connectors. However, if the board itself has failed due to a burnt component or internal fault, replacement of the feature board is required and is best handled by a technician familiar with refrigerator control systems.

The refrigerator's core cooling functions may continue to operate normally while this code is active, since the feature board primarily handles dispenser and display functions. However, it is not advisable to ignore the fault long-term, as a damaged board can cause further electrical issues. Monitor the refrigerator closely and arrange for service as soon as practical.