GE Washer Error Code 215

Error code 215 on a GE washer means the compressor motor inverter board has reported a fault. The inverter board controls the compressor motor, and this code indicates the board has detected an abnormal condition and shut down. The first step in diagnosing this is checking the AC supply voltage at connector CN8, which should read between 102VAC and 132VAC.

No, you should not attempt to run the washer while error code 215 is active. The fault indicates a problem with the inverter board that controls the compressor motor, and continued operation could cause additional damage to the motor or board. Leave the machine unplugged until the fault has been properly diagnosed and repaired.

A power reset may temporarily clear the code, but if the underlying fault condition still exists, the code will return once the machine attempts to run. Simply resetting the washer without addressing the root cause, whether that is a voltage problem, a faulty inverter board, or a motor issue, will not resolve the fault. A proper diagnostic process is necessary to clear the code permanently.

Some causes of error code 215 can be addressed without replacing parts, such as correcting a low or high supply voltage issue or reseating a loose connector at CN8. However, if the inverter board or compressor motor has failed, replacement of those components is required. Working with AC line voltage and inverter boards involves shock hazards, so this repair is best handled by a qualified technician if you are not comfortable with electrical diagnostics.

Repair costs vary depending on the root cause. If only a wiring or voltage issue is involved, costs may be limited to a service call fee in the range of $75 to $150. If the compressor motor inverter board needs replacement, parts and labor combined typically range from $200 to $450 or more depending on your location and parts availability. A compressor motor replacement would generally cost more.