mypros+
Error code reference

GE Washer Error Code EB2

Incoming line voltage above 130 VAC.

GE codesGE washer codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the EB2 error code actually means

Your GE washer is detecting that the electricity coming from your wall outlet is too high, above what the washer is designed to handle safely. This is usually an issue with your home's electrical supply rather than the washer itself. You should check your outlet voltage and contact an electrician if the power level is truly running too high.

Diagnostic procedure

The full EB2 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check voltage at the outlet. If below 130 VAC, replace the control board.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock EB2 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of EB2

Ranked by how often they cause this code
  1. 1Utility grid overvoltage
  2. 2Faulty or loose neutral connection
  3. 3Wiring or outlet problems
  4. 4Faulty control board

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about EB2

What does EB2 mean on a GE washer?
EB2 means the washer's control board has detected incoming line voltage above 130 VAC. This is a protective fault designed to prevent damage from overvoltage conditions. The issue may originate from the home's electrical supply or, if the outlet voltage is normal, from a faulty control board that is misreading the voltage.
Is it safe to use my GE washer when the EB2 code is showing?
No, you should not operate the washer while this code is active. Voltage above 130 VAC can damage the motor, control electronics, and other internal components. Resolve the electrical supply issue or replace the control board before resuming use.
How much does it cost to fix a GE washer EB2 error?
If the problem is a faulty control board, replacement parts and labor typically range from around $150 to $350 depending on the specific model and local labor rates. If the issue is traced to a wiring or outlet problem, electrician costs can vary from $75 to $200 or more depending on the scope of the repair.
Can I fix the EB2 error myself?
You can start by measuring the voltage at the wall outlet with a multimeter. If the voltage is at or below 130 VAC and the code persists, replacing the control board is the indicated repair. If the outlet voltage is genuinely above 130 VAC, that is an electrical supply problem that typically requires a licensed electrician to resolve.
Will resetting the washer clear the EB2 error code?
A reset may temporarily clear the code, but it will return if the underlying cause has not been addressed. If the incoming voltage remains above 130 VAC, or if the control board's sensing circuit is defective, the fault will reappear during normal operation.

Related GE washer error codes

All GE washer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass